Tagged: freshwater

• AccumulatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to non-hydroelectric consents. It contains upstream accumulated maximum consented rates by use, source and in total. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

​

This dataset was used for the "Consented freshwater takes" indicator, as part of the environmental reporting series: Our freshwater 2020. This indicator can be found at www.stats.govt.nz/indicators/consented-freshwater-...

• This indicator helps us to understand where water is consented to be taken from, how much is allocated to be taken, and what it is used for. We report on the maximum volume that can be taken annually, and the maximum rate of take by primary use, primary source, and region for consents that involve consumptive water takes.
• Our analysis and results have not included consents for hydroelectricity generation or non-consumptive water use. We also present the modelled potential impact of consented consumptive freshwater takes (excluding hydropower consents) on natural river flow across New Zealand.
• More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

​

The “Consented freshwater takes” indicator uses two datasets

• Consented_freshwater_takes_accumulated_frame. The original dataset on MfE data service is data.mfe.govt.nz/table/102976-national-water-alloc...
• Consented_freshwater_takes_take_frame. The original dataset on MfE data service is data.mfe.govt.nz/table/102978-national-water-alloc...

​

RemovedTakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

“RemovedTakeFrame” has a similar format to “TakeFrame”, but “RemovedTakeFrame” contains data for consents whose rates of take were either all missing or all zeros

​

This dataset was used for the "Consented freshwater takes" indicator, as part of the environmental reporting series: Our freshwater 2020. This indicator can be found at www.stats.govt.nz/indicators/consented-freshwater-...

• This indicator helps us to understand where water is consented to be taken from, how much is allocated to be taken, and what it is used for. We report on the maximum volume that can be taken annually, and the maximum rate of take by primary use, primary source, and region for consents that involve consumptive water takes.
• Our analysis and results have not included consents for hydroelectricity generation or non-consumptive water use. We also present the modelled potential impact of consented consumptive freshwater takes (excluding hydropower consents) on natural river flow across New Zealand.
• More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

The “Consented freshwater takes” indicator uses two datasets

• Consented_freshwater_takes_accumulated_frame. The original dataset on the MfE data service is data.mfe.govt.nz/table/102976-national-water-alloc...
• Consented_freshwater_takes_take_frame. The original dataset on the MfE data service is data.mfe.govt.nz/table/102978-national-water-alloc...

​

TakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data describing active consents.

These data are the raw river water quality observations used to calculate state and trends for the period ending 2017.

It contains ten parameters of water quality based on measurements made at monitored river sites:

• Nitrate-nitrogen
• Ammoniacal nitrogen
• Ammoniacal nitrogen (adjusted)
• Total nitrogen
• Total phosphorus
• Dissolved reactive phosphorus
• Water clarity
• Turbidity
• Escherichia coli
• Macroinvertebrate community index

​

More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the summary report available at www.mfe.govt.nz/publications/fresh-water/water-qua....

​

Note: This dataset has a large number of rows, which Microsoft Excel may not be able to fully open. A DBMS, statistical or GIS application is needed to view the entire dataset.

RemovedHydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

RemovedHydroFrame contains non-consumptive hydropower information.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

NZ regional council freshwater nutrient and biomass measurements 2012-2020.

​

Used to derive nitrogen and phosphorus concentrations and exceedance criteria for managing periphyton in fresh water.

​

Creative Commons 4.0 International by Ministry for the Environment and Statistics New Zealand

​

Variables:

• Site (the number of the data point itself)
• RC (Regional Council that collected the measurement)
• RCSiteID (the identifier used by that specific council)
• SiteName (the Site where the measurement was collected)
• DateChla (date the chlorophyll-a measurement was collected)
• Year (Year of collection)
• Month (Month of collection)
• Chla ( mg chlorophyll-a per square meter)
• NOxppb (Nitrous oxide parts per billion)
• NH4ppb (Ammonia parts per billion)
• DRPppb (Dissolved Reactive Phosphorus parts per billion)
• TNppb (Total Nitrogen parts per billion)
• TPppb (Total Phosphorus parts per billion)
• DINppb (Dissolved Inorganic Nitrogen parts per billion)
• EC (Electrical Conductivity)
• pH (acidity/basicness of the water at the sample location)
• Temp (water temperature in degrees Celsius at time of measurement)
• Turbidity (turbidity of the water at time of measurement)
• Clarity_m (water clarity, in metres, at the time of measurement)

​

N/A values in the data set refer to an absence of measurement for that specific variable.

​

Report:

environment.govt.nz/publications/derivation-of-nut...

Snelder T, Kilroy C, Booker D (2021) Derivation of Nutrient Criteria for Periphyton Biomass Objectives. Using regional council monitoring data. LWP and NIWA Ltd, Christchurch, New Zealand

​

For subject matter questions please contact freshwater@me.govt.nz.