River Environment Classification Taranaki (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1797
46
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51828
Data type Vector linestring
Feature count 16783
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Petroleum Wells

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1786
29
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location of petroleum wells in the territorial sea and the exclusive economic zone.

Layer ID 52757
Data type Vector point
Feature count 1188
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 4m in oceanic regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1805
2
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of wave-height thresholds for each year from 2008 to 2015 in oceanic regions around New Zealand.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the four metre threshold in oceanic regions.

Layer ID 53503
Data type Vector multipolygon
Feature count 48
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Mineral and Coal Permits

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1761
38
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of mineral and coal permits in the territorial sea and the exclusive economic zone.

Layer ID 52750
Data type Vector multipolygon
Feature count 1087
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 4m in coastal regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1775
4
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of a wave-height threshold for each year from 2008 to 2015 in coastal regions.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the four metre threshold in coastal regions.

Layer ID 53500
Data type Vector multipolygon
Feature count 144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 6m in coastal regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1773
5
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of a wave-height threshold for each year from 2008 to 2015 in coastal regions.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the six metre threshold in coastal regions.

Layer ID 53501
Data type Vector multipolygon
Feature count 144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Bay of Plenty (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1724
48
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51825
Data type Vector linestring
Feature count 28391
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Gisborne (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1728
40
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 51824
Data type Vector linestring
Feature count 14146
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Type2 Marine Protected Areas

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1704
41
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of Type 2 marine protected areas in the territorial sea.

Layer ID 52762
Data type Vector multipolygon
Feature count 40
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Occurrence of non-native species in monitored ports

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1720
15
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The number of exotic species observed in New Zealand's monitored ports of first entry for international vessels

Layer ID 52749
Data type Vector point
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 85