River Environment Classification New Zealand (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5058
353
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide can be found at data.mfe.govt.nz/document/123-river-environment-cl...

Layer ID 51845
Data type Vector linestring
Feature count 576688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Wellington (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2086
83
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51829
Data type Vector linestring
Feature count 18074
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Land Environments New Zealand (LENZ) - Level 1 Grid (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1545
22
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 51800
Data type Grid
Resolution 100.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Canterbury (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1277
66
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51853
Data type Vector linestring
Feature count 94350
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Land Environments New Zealand (LENZ) - Level 4 Grid (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1076
26
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 51801
Data type Grid
Resolution 25.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Average annual chlorophyll-a concentration, 2014

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1094
11
Added
08 Feb 2016

This dataset was first added to MfE Data Service on 08 Feb 2016.

"The average concentration of chlorophyll-a (chl-a) in phytoplankton for 2014.
Concentrations of chl-a in phytoplankton are used to assess primary productivity in our oceans. Phytoplankton are primary producers of biomass and form the basis of the oceans’ food chains."

Layer ID 52828
Data type Grid
Resolution 5000.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Waikato (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1005
73
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51856
Data type Vector linestring
Feature count 50723
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Reserves

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1033
33
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of Marine reserves (type 1 marine protected areas) in the territorial sea.

Layer ID 52760
Data type Vector multipolygon
Feature count 44
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Auckland (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

961
45
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51809
Data type Vector polygon
Feature count 10856
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Land Environments New Zealand (LENZ) - Level 3 Grid (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

940
15
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 51822
Data type Grid
Resolution 25.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 73