Lightning recorders

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2152
22
Added
18 Feb 2016

This dataset was first added to MfE Data Service on 18 Feb 2016.

Lightning is the discharge of electricity from thunderstorms. Ground strikes can cause significant damage to property and infrastructure, and injure or kill people and livestock. Lightning is often associated with other severe weather events, such as strong wind gusts. Thunderstorms may increase in frequency and intensity with climate change.

This dataset shows the location of sensors in the New Zealand Lightning Detection Network (NZLDN), run by MetService.

Sensors around the country detect lightning over the New Zealand land mass and a short distance out to sea. These sensors detect very accurately the electrical discharge, location, and time, as well as noting other parameters such as current strength. The NZLDN records both cloud-to-cloud and cloud-to-ground strikes.

Layer ID 53312
Data type Vector point
Feature count 10
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Mineral and Coal Reserved Area

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1622
16
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of mineral and coal reserved areas in the territorial sea and the exclusive economic zone.

Layer ID 52751
Data type Vector multipolygon
Feature count 7
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Mortality of indigenous tree sp black beech 2002–2014

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1550
5
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"The rates of death (mortality) of indigenous tree species vary across New Zealand. Changes in the state of the environment (such as from browsing pests, large-scale weather events, or climate change) may change the rates of mortality of particular tree species. This in turn may alter forest processes. Repeated surveys of the distribution of mortality rates can alert us to impacts on our indigenous forests.

This data set relates to the "Distribution of indigenous trees" measure on the Environmental Indicators, Te taiao Aotearoa website."

Layer ID 52769
Data type Vector point
Feature count 195
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Option 1 for reducing nitrogen loss

Online
Only
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 1 of section 8.4 Immediate action to reduce nitrogen loss.

This web map has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document. The proposals are currently being consulted on.

It provides extra detail on Option 1 in section 8.4 of the discussion document (Immediate action to reduce nitrogen loss). The map indicates the pastoral catchments and sub-catchments specified as high-nitrate in Option 1, where regional rules are not already in place or proposed, and shows the land considered to be low-slope.

Low-slope is defined in this option as land parcels with an average slope of less than 5, 7 or 10 degrees. We are seeking feedback on the appropriate slope threshold to use.

The catchments are those with the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset found here. Catchments where the predominant sources of nitrate are non-pastoral in origin are excluded.

Under Option 1, a per-hectare cap, or threshold, for nitrogen losses will be set for each sub-catchment with similar soil type and rainfall. This threshold will be based on a ranking of nitrogen losses from farms within each sub-catchment, and could be set at the 90th percentile, or the 70th, or a point between. Feedback is sought on where this threshold should be set.

This is only one of the options being consulted on, The areas indicated are provisional and may not equate to areas included in regulation.

Layer ID 103881
Data type Vector polygon
Feature count 13564
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Option 3 for reducing nitrogen loss

Online
Only
Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 3 of section 8.4 Immediate action to reduce nitrogen loss.

This dataset has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document.  These proposals are currently being consulted on.

The map provides extra detail on Option 3 in section 8.4: Immediate action to reduce nitrogen loss, of the discussion document.  The map indicates the high-nitrate catchments and sub-catchments that could be included under Option 3. These catchments have the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset which can be found here.  The catchments are further restricted to regions that do not have rules already in place or proposed. Catchments where the predominant sources of nitrate are not pastoral or horticultural in origin have been excluded.

Under this option, farmers in these catchments would have to show, in the freshwater module in their farm plan, how they will rapidly reduce nutrient leaching. Progress against the plan would be monitored by independent auditors and the regional council could take enforcement action if required.

This is only one of the options being consulted on. The areas indicated are provisional and may not equate to areas included in a regulation.

Layer ID 103879
Data type Vector polygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Recruitment of indigenous tree sp black beech 2002–2014

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

199
3
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"The rates of establishment (recruitment) of indigenous tree species vary across New Zealand. Changes in the state of the environment (such as from browsing pests, large-scale weather events, or climate change) may change the rates of recruitment of particular tree species. This in turn may alter forest processes. Repeated surveys of the distribution of recruitment rates can alert us to impacts on our indigenous forests.

This data set relates to the "Distribution of indigenous trees" measure on the Environmental Indicators, Te taiao Aotearoa website."

Layer ID 52782
Data type Vector point
Feature count 195
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Tasman (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1609
26
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51806
Data type Vector linestring
Feature count 14329
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Tasman (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1614
22
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51811
Data type Vector polygon
Feature count 16237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed West Coast (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

727
28
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51823
Data type Vector polygon
Feature count 75826
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification West Coast (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1556
31
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51857
Data type Vector linestring
Feature count 59643
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 20