Seamount closures

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9856
28
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of seamount closures designated in the exclusive economic zone.

Layer ID 52761
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Northland (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8526
66
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51810
Data type Vector polygon
Feature count 30637
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Northland (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8666
132
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51805
Data type Vector linestring
Feature count 27492
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Particulate matter exceedences 2006–2013

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2712
37
Added
09 Dec 2015

This dataset was first added to MfE Data Service on 09 Dec 2015.

"Particulate matter 10 micrometres or less in diameter (PM10) in the air comprises solid particles and liquid droplets from both natural and human-made sources. The main sources are burning wood or coal for home heating, and sea spray. PM10 is of particular concern because it is found in high concentrations in some areas. It can damage health and is associated with effects ranging from respiratory irritation to some forms of cancer.

This dataset records the number of times that concentrations of PM10 exceed the daily standard for years 2006 to 2013. Field names are Yr_.

Data is broken down by airshed.

This dataset relates to the ""PM10 daily concentrations"" measure on the Environmental Indicators, Te taiao Aotearoa website.

Geometry: Points

Units: No. of days"

Layer ID 52668
Data type Vector point
Feature count 43
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Particulate matter concentrations 2006–2013

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2366
57
Added
09 Dec 2015

This dataset was first added to MfE Data Service on 09 Dec 2015.

"Particulate matter 10 micrometres or less in diameter (PM10) in the air comprises solid particles and liquid droplets from both natural and human-made sources. PM10 can be emitted from the combustion of fuels, such as wood and coal (eg from home heating and industry), and petrol and diesel (from vehicles). Natural PM10 includes sea salt, dust, pollen, smoke (from bush fires), and volcanic ash. Nationally, burning wood or coal for home heating is the main human-made source of PM10. PM10 is of particular concern because it is found in high concentrations in some areas and can damage health. It is associated with effects ranging from respiratory irritation to some forms of cancer.

This dataset shows annual average PM10 concentrations for years 2006 to 2013. Field names are PM10_.
This dataset also shows describes whether the PM10 trend, ie, whether concentrations have shown statisticsally significantly increases, decreases, or an indeterminate trend.

Data is broken down by monitoring site.

This dataset relates to the ""Annual average PM10 concentrations in towns and cities"" measure on the Environmental Indicators, Te taiao Aotearoa website.

Geometry: Points

Units: micrograms/m3"

Layer ID 52667
Data type Vector point
Feature count 44
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Option 3 for reducing nitrogen loss

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

579
11
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 3 of section 8.4 Immediate action to reduce nitrogen loss.

This dataset has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document.  These proposals are currently being consulted on.

The map provides extra detail on Option 3 in section 8.4: Immediate action to reduce nitrogen loss, of the discussion document.  The map indicates the high-nitrate catchments and sub-catchments that could be included under Option 3. These catchments have the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset which can be found here.  The catchments are further restricted to regions that do not have rules already in place or proposed. Catchments where the predominant sources of nitrate are not pastoral or horticultural in origin have been excluded.

Under this option, farmers in these catchments would have to show, in the freshwater module in their farm plan, how they will rapidly reduce nutrient leaching. Progress against the plan would be monitored by independent auditors and the regional council could take enforcement action if required.

This is only one of the options being consulted on. The areas indicated are provisional and may not equate to areas included in a regulation.

Layer ID 103879
Data type Vector polygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Option 1 for reducing nitrogen loss

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1393
12
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 1 of section 8.4 Immediate action to reduce nitrogen loss.

This web map has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document. The proposals are currently being consulted on.

It provides extra detail on Option 1 in section 8.4 of the discussion document (Immediate action to reduce nitrogen loss). The map indicates the pastoral catchments and sub-catchments specified as high-nitrate in Option 1, where regional rules are not already in place or proposed, and shows the land considered to be low-slope.

Low-slope is defined in this option as land parcels with an average slope of less than 5, 7 or 10 degrees. We are seeking feedback on the appropriate slope threshold to use.

The catchments are those with the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset found here. Catchments where the predominant sources of nitrate are non-pastoral in origin are excluded.

Under Option 1, a per-hectare cap, or threshold, for nitrogen losses will be set for each sub-catchment with similar soil type and rainfall. This threshold will be based on a ranking of nitrogen losses from farms within each sub-catchment, and could be set at the 90th percentile, or the 70th, or a point between. Feedback is sought on where this threshold should be set.

This is only one of the options being consulted on, The areas indicated are provisional and may not equate to areas included in regulation.

Layer ID 103881
Data type Vector polygon
Feature count 13564
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Occurrence of non-native species in monitored ports

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8363
35
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The number of exotic species observed in New Zealand's monitored ports of first entry for international vessels

Layer ID 52749
Data type Vector point
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lightning recorders

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12808
41
Added
18 Feb 2016

This dataset was first added to MfE Data Service on 18 Feb 2016.

Lightning is the discharge of electricity from thunderstorms. Ground strikes can cause significant damage to property and infrastructure, and injure or kill people and livestock. Lightning is often associated with other severe weather events, such as strong wind gusts. Thunderstorms may increase in frequency and intensity with climate change.

This dataset shows the location of sensors in the New Zealand Lightning Detection Network (NZLDN), run by MetService.

Sensors around the country detect lightning over the New Zealand land mass and a short distance out to sea. These sensors detect very accurately the electrical discharge, location, and time, as well as noting other parameters such as current strength. The NZLDN records both cloud-to-cloud and cloud-to-ground strikes.

Layer ID 53312
Data type Vector point
Feature count 10
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Lake water quality, 2009–13

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

10849
80
Added
17 Feb 2016

This dataset was first added to MfE Data Service on 17 Feb 2016.

"The Lake Trophic Level Index (TLI) characterises the life supporting capacity of a lake based on nutrient enrichment. In general, the higher the TLI score, the poorer the water quality in the lake. Lakes with extremely poor quality are rarely suitable for recreation and provide poor quality habitat for aquatic species.
Care should be taken when interpreting these results. Monitored lakes consist of about 4 percent of all New Zealand lakes, and programmes may focus on those that have poor water quality or are at risk due to the type of land use in their catchment.
After checking for data consistency, the lakes considered suitable for national comparison are sparsely and unevenly distributed, with gaps in the Manawatu, Taranaki, Tasman, Marlborough, Otago, and West Coast regions. The lakes considered in the analysis are located mainly in Northland, Bay of Plenty, Hawke’s Bay, and Canterbury.
This dataset relates to the ""Lake water quality: trophic level index"" measure on the Environmental Indicators, Te taiao Aotearoa website.
"

Layer ID 53310
Data type Vector point
Feature count 86
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 33