LUCAS NZ Land Use Map 1990 2008 2012 2016 v008

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

50445
2338
Updated
19 Jun 2020

This dataset was last updated on MfE Data Service on 19 Jun 2020.

The Land Use Map is composed of New Zealand-wide land use classifications (12) nominally at 1 January 1990, 1 January 2008, 31 December 2012 and 31 December 2016 (known as "1990", "2008", "2012" and "2016"). These date boundaries were dictated by the First and Second Commitment Periods of the Kyoto Protocol. The layer can therefore be used to create either a 1990, 2008, 2012 or 2016 land use map depending on what field is symbolised.

Layer ID 52375
Data type Vector multipolygon
Feature count 651835
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Hydrological modelling to support proposed sediment attribute impact testing 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

679
20
Updated
03 Jun 2020

This dataset was last updated on MfE Data Service on 03 Jun 2020.

This dataset reports modelled mean annual suspended sediment load reduction required to meet suspended sediment attribute bottom lines in the NPS-FM 2020. Results are reported for the REC 2 river reach scale as well as at the “catchment pourpoint average” scale. The dataset includes masks for the DoC estate as well as glacial mountain source of flow.

During policy development, the Ministry for the Environment tested suspended sediment load reductions required to meet various potential attribute bottom lines. The information from February 2020 reflects the bottom lines in the NPS-FM 2020. For further information on this specific dataset, see “Hicks and Shankar 2020. Contract 23184 Task: Sediment load reductions to meet visual clarity bottom lines”. This report is available on the Ministry for the Environment’s publications website where it is listed as Technical Report 6.

For further information on the modelling, see Hicks et al. (2019) Sediment load reductions to meet suspended and deposited sediment thresholds. NIWA Client Report No. 2019100CH. Prepared for the Ministry for the Environment. This report is available here: www.mfe.govt.nz/publications/fresh-water/sediment-....

Note that the river segment and pour point catchment results provided in the 2019 dataset form the basis for the erosion and economic modelling assessment of proposed sediment attributes as reported in Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Layer ID 103687
Data type Vector multipolygon
Feature count 633
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Sea-draining catchments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1279
250
Updated
24 Jul 2019

This dataset was last updated on MfE Data Service on 24 Jul 2019.

This dataset provides boundaries for catchments that drain to the sea (i.e. sea draining catchments).

It is extracted from the Freshwater Ecosystems of New Zealand (FENZ) v1.0 geodatabase. Ministry for the Environment hosts this copy of this layer for convenience and visibility. For all inquiries please contact Department of Conservation directly.

FENZ requires specialist GIS knowledge for its technical operation and biodiversity knowledge for understanding the content. Because of FENZ’s complexity, DOC is providing advice, briefings and training (where possible) to ensure users understand its strengths, limitations and appropriate applications.

If you would like more information about FENZ or access to any FENZ data sets, email fenz@doc.govt.nz.

www.doc.govt.nz/our-work/freshwater-ecosystems-of-...

Variables:

Catch_id - This is a unique identifier that can be used to link to other datasets in the FENZ database, or datasets from other sources that also use a FENZ id.

Catchment names:

Currently a definitive catchment names dataset does not exist. However for your convenience, an unofficial list has been provided in the attachments ("fenz_catnames.csv") which can be joined to the catchment boundaries to provide names. Feedback on the accuracy or completeness of these names is welcomed.

Layer ID 99776
Data type Vector multipolygon
Feature count 10131
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Flow

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

32
7
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model was used to estimate near-surface groundwater flow amplitudes and separated into four classes to encompass the uncertainty of the dataset.

Layer ID 104449
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Estimated groundwater flux, 2019: Discharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

389
13
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model (NWT) was used to estimate the probability of groundwater discharging to the surface and separated into classes to encompass the uncertainty of the dataset.

Layer ID 104448
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Estimated groundwater flux, 2019: Recharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

482
9
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

Three national models of groundwater recharge in New Zealand were used (NGRM, TopNet, IrriCalc) to create a mean model of groundwater recharge. This dataset summarises the gridded groundwater recharge from this model mean for the period 2000-2015 in mm/day.

_Attachment 1: _A complementary dataset describing the standard deviation of the NZGroundwaterRecharge_mean_20002015 dataset.

Attachment 2: This dataset summarises the gridded autumn groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 3: This dataset summarises the gridded spring groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 4: This dataset summarises the gridded summer groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 5: This dataset summarises the gridded winter groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Layer ID 104447
Data type Grid
Resolution 1010.000m
Services Raster Query API, Catalog Service (CS-W)

Depth to hydrogeological basement map, 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

351
14
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This data set provides an update of New Zealand’s depth to hydrogeological basement map. Depth to hydrogeological basement can be loosely defined as the ‘base of aquifers’; or more strictly as ‘the depth to where primary porosity and permeability of geological material is low enough such that flued volumes and flow rates can be considered negligible’. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: depth to hydrogeological basement. Lower Hutt (NZ): GNS Science. 19 p. Consultancy Report 2019/140.

A national model was used to estimate depth to hydrogeological basement. Hydrogeological basement refers to geological material with primary porosity and permeability that is low enough such that fluid volumes and flow rates can be considered negligible.

Layer ID 104446
Data type Grid
Resolution 250.000m
Services Raster Query API, Catalog Service (CS-W)

Nationally consistent Hydrogeological-unit Map, 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

48
12
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides a classification of geological units in terms of their importance for groundwater flow and storage. For more detail on the process and methods, see White et al. (2019). New Zealand groundwater atlas: hydrogeological-unit map of New Zealand. Lower Hutt (NZ): GNS Science. 88 p. Consultancy Report 2019/144.

New Zealand Hydrogeological unit map (HUM) separated into aquifers, aquitards, aquicludes and basement developed in a nationally-consistent manner. This dataset includes only outcropping hydrogeological units. This dataset was also joined to the hydrogeological system dataset (Moreau et al. 2019), to provide a single polygon for each unique combination of HUM and hydrogeological system. Summary statistics of surficially mapped products are provided for each polygon (groundwater use, flow, recharge, discharge to the surface; depth to hydrogeological basement; and number of drinking water wells serving >100 people).

Attachment: New Zealand Hydrogeological unit map (HUM) separated into aquifers, aquitards, aquicludes and basement developed in a nationally-consistent manner. This dataset includes overlapping stacked polygons that represent different aged hydrogeological units.

Layer ID 104445
Data type Vector multipolygon
Feature count 1290
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Ocean and coastal extreme waves (8m), 2012

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1302
4
Added
16 Oct 2019

This dataset was first added to MfE Data Service on 16 Oct 2019.

These data estimate the occurence of extreme wave events in coastal and oceanic waters for 2012, particularly for wave events where significant wave height exceeds a threshold of 8 metres and for a period of at least 12 hours. Significant wave height is defined as four times the square root of the variance of sea surface elevation due to wave motion.

More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

Layer ID 104088
Data type Grid
Resolution About 13356.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Ocean and coastal extreme waves (6m), 2012

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

993
1
Added
16 Oct 2019

This dataset was first added to MfE Data Service on 16 Oct 2019.

These data estimate the occurence of extreme wave events in coastal and oceanic waters for 2012, particularly for wave events where significant wave height exceeds a threshold of 6 metres and for a period of at least 12 hours. Significant wave height is defined as four times the square root of the variance of sea surface elevation due to wave motion.

More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

Layer ID 104087
Data type Grid
Resolution About 13356.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed
Results 21 to 30 of 613