Erosion modelling to support proposed sediment attribute impact testing 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
05 Sep 2019

This dataset was first added to MfE Data Service on 05 Sep 2019.

This dataset reports erosion modelling results regarding annual mean sediment load reductions required to meet proposed suspended sediment attribute bottom lines. For more detail on the modelling process and methods, see Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Results of modelled mitigations are reported at catchment scale and at the REC2 river reach scale. The modelled on-farm mitigations (per economic optimisation as reported in Neverman et al. (2019) are also mapped.

Layer ID 103850
Data type Vector multipolygon
Feature count 585
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Hydrological modelling to support proposed sediment attribute impact testing 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
14 Aug 2019

This dataset was first added to MfE Data Service on 14 Aug 2019.

This dataset reports modelled mean annual suspended sediment load reduction required to meet proposed suspended sediment attribute bottom lines. Results are reported for the REC 2 river reach scale as well as at the “catchment pourpoint average” scale. The dataset includes masks for the DoC estate as well as glacial mountain source of flow. For further information, see Hicks et al. (2019) Sediment load reductions to meet suspended and deposited sediment thresholds. NIWA Client Report No. 2019100CH. Prepared for the Ministry for the Environment.

Note that the river segment and pour point catchment results provided here (in the attached folders with the same names) form the basis for the erosion and economic modelling assessment of proposed sediment attributes as reported in Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Layer ID 103687
Data type Vector multipolygon
Feature count 627
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

598
14
Updated
10 Aug 2017

This dataset was last updated on MfE Data Service on 10 Aug 2017.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

This data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at www.mfe.govt.nz/fresh-water/national-targets-swimm... .

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Column headings:

LID: LID from Freshwater Environments of New Zealand (FENZ)

Name: Lake name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/freshwater-management-...

Note blank cells are lakes where a prediction was not possible because of missing predictor variables.

Lake_Permeter(m): lake perimeter in metres

Regional_council: Regional council

Table ID 53618
Data type Table
Row count 861
Services Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories [Raw Model Output]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

288
4
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

Note this data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset has now been superseded due to consultation with local authorities, and this is the latest version: data.mfe.govt.nz/layer/95555-river-water-quality-f...

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

CHLA: Chlorophyll a (mg/L)

SECCHI: Secchi disc depth (m)

TLI3: Trophic Level Index (unitless)

TN: Total nitrogen (mg/m3)

TP: Total phosphorus (mg/m3)

CyanBVl: Cyanobacterial biovolume (mm3/L)

Cy_cat: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95561
Data type Vector multipolygon
Feature count 3801
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories, December 2017 [Superseded]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

31
0
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

Note this data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset has now been superseded due to consultation with local authorities, and this is the latest version: data.mfe.govt.nz/layer/95555-river-water-quality-f...

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95556
Data type Vector multipolygon
Feature count 861
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories, March 2017 [Superseded]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

35
0
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

Note this data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset has now been superseded due to consultation with local authorities, and this is the latest version: data.mfe.govt.nz/layer/95555-river-water-quality-f...

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95559
Data type Vector multipolygon
Feature count 906
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories, September 2017 [Latest]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

216
5
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset is the latest version of the Water Quality for Swimming Categories set.

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95554
Data type Vector multipolygon
Feature count 858
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

MfE Low-slope extent 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
01 Sep 2019

This dataset was first added to MfE Data Service on 01 Sep 2019.

This dataset shows land parcels within grassland and annual cropping areas which have an average slope of less than 10 degrees. Polygons are attributed into 3 slope classes: less than 5 degrees mean slope; 5 - 7 degrees mean slope; 7 - 10 degrees mean slope.

Layer ID 103847
Data type Vector multipolygon
Feature count 589664
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: AccumulatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

AccumulatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to non-hydroelectric consents. It contains upstream accumulated maximum consented rates by use, source and in total. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102976
Data type Table
Row count 698236
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)
Results 1 to 10 of 29