Updated suspended sediment yield estimator and estuarine trap efficiency model results 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

144
18
Added
14 Aug 2019

This dataset was first added to MfE Data Service on 14 Aug 2019.

This dataset includes three “packages” of information, each with multiple variables. The packages include:

  1. Load – results on mean annual suspended sediment load reported by REC 2 river reach scale for various model scenario variations.
  2. Lakes – results on sediment inflow, outflow, and entrapment in lakes and reservoirs
  3. Coastal – results on sediment inflows, trap efficiency, and sedimentation rates in coastal hydrosystems (estuaries)

For further detail on the modelling methods and discussing results, see Hicks, M., Semademi-Davies, A., Haddadchi, A., Shankar, U., Plew, D. (2019) Updated sediment load estimator for New Zealand. NIWA Client Report No. 2018341CH, prepared for Ministry for the Environment. January 2019. Available online: www.mfe.govt.nz/publications/fresh-water/updated-s...

Note that some portions of this dataset refine and update 2011 modelling on suspended sediment loads across New Zealand, whereas other components, especially the coastal package, report new modelling results.

Layer ID 103686
Data type Vector linestring
Feature count 593466
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Lake Water Quality for Swimming Categories, December 2017 [Superseded]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

256
2
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

Note this data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset has now been superseded due to consultation with local authorities, and this is the latest version: data.mfe.govt.nz/layer/95555-river-water-quality-f...

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95556
Data type Vector multipolygon
Feature count 861
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Flow

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

32
7
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model was used to estimate near-surface groundwater flow amplitudes and separated into four classes to encompass the uncertainty of the dataset.

Layer ID 104449
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

22
6
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: TakeFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

24
35
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

TakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data describing active consents.

Table ID 102977
Data type Table
Row count 16713
Services Web Feature Service (WFS), Catalog Service (CS-W)

Nationally consistent Hydrogeological-unit Map, 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

48
12
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides a classification of geological units in terms of their importance for groundwater flow and storage. For more detail on the process and methods, see White et al. (2019). New Zealand groundwater atlas: hydrogeological-unit map of New Zealand. Lower Hutt (NZ): GNS Science. 88 p. Consultancy Report 2019/144.

New Zealand Hydrogeological unit map (HUM) separated into aquifers, aquitards, aquicludes and basement developed in a nationally-consistent manner. This dataset includes only outcropping hydrogeological units. This dataset was also joined to the hydrogeological system dataset (Moreau et al. 2019), to provide a single polygon for each unique combination of HUM and hydrogeological system. Summary statistics of surficially mapped products are provided for each polygon (groundwater use, flow, recharge, discharge to the surface; depth to hydrogeological basement; and number of drinking water wells serving >100 people).

Attachment: New Zealand Hydrogeological unit map (HUM) separated into aquifers, aquitards, aquicludes and basement developed in a nationally-consistent manner. This dataset includes overlapping stacked polygons that represent different aged hydrogeological units.

Layer ID 104445
Data type Vector multipolygon
Feature count 1290
ElevationZ coordinates
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)
Results 31 to 36 of 36