Erosion modelling to support proposed sediment attribute impact testing 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

411
16
Added
05 Sep 2019

This dataset was first added to MfE Data Service on 05 Sep 2019.

This dataset reports erosion modelling results regarding annual mean sediment load reductions required to meet proposed suspended sediment attribute bottom lines. For more detail on the modelling process and methods, see Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Results of modelled mitigations are reported at catchment scale and at the REC2 river reach scale. The modelled on-farm mitigations (per economic optimisation as reported in Neverman et al. (2019) are also mapped.

Layer ID 103850
Data type Vector multipolygon
Feature count 585
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Hydrological modelling to support proposed sediment attribute impact testing 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

223
8
Added
14 Aug 2019

This dataset was first added to MfE Data Service on 14 Aug 2019.

This dataset reports modelled mean annual suspended sediment load reduction required to meet proposed suspended sediment attribute bottom lines. Results are reported for the REC 2 river reach scale as well as at the “catchment pourpoint average” scale. The dataset includes masks for the DoC estate as well as glacial mountain source of flow. For further information, see Hicks et al. (2019) Sediment load reductions to meet suspended and deposited sediment thresholds. NIWA Client Report No. 2019100CH. Prepared for the Ministry for the Environment.

Note that the river segment and pour point catchment results provided here (in the attached folders with the same names) form the basis for the erosion and economic modelling assessment of proposed sediment attributes as reported in Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Layer ID 103687
Data type Vector multipolygon
Feature count 627
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: AccumulatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

300
12
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

AccumulatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to non-hydroelectric consents. It contains upstream accumulated maximum consented rates by use, source and in total. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102976
Data type Table
Row count 698236
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3
5
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

330
2
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

Table ID 102980
Data type Table
Row count 227
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: RemovedHydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

286
5
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

RemovedHydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

RemovedHydroFrame contains non-consumptive hydropower information.

Table ID 102981
Data type Table
Row count 69
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: RemovedTakeFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

236
5
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

RemovedTakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

“RemovedTakeFrame” has a similar format to “TakeFrame”, but “RemovedTakeFrame” contains data for consents whose rates of take were either all missing or all zeros

Table ID 102978
Data type Table
Row count 2966
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: TakeFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

TakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data describing active consents.

Table ID 102977
Data type Table
Row count 16713
Services Web Feature Service (WFS), Catalog Service (CS-W)

Option 1 for reducing nitrogen loss

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

187
6
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 1 of section 8.4 Immediate action to reduce nitrogen loss.

This web map has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document. The proposals are currently being consulted on.

It provides extra detail on Option 1 in section 8.4 of the discussion document (Immediate action to reduce nitrogen loss). The map indicates the pastoral catchments and sub-catchments specified as high-nitrate in Option 1, where regional rules are not already in place or proposed, and shows the land considered to be low-slope.

Low-slope is defined in this option as land parcels with an average slope of less than 5, 7 or 10 degrees. We are seeking feedback on the appropriate slope threshold to use.

The catchments are those with the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset found here. Catchments where the predominant sources of nitrate are non-pastoral in origin are excluded.

Under Option 1, a per-hectare cap, or threshold, for nitrogen losses will be set for each sub-catchment with similar soil type and rainfall. This threshold will be based on a ranking of nitrogen losses from farms within each sub-catchment, and could be set at the 90th percentile, or the 70th, or a point between. Feedback is sought on where this threshold should be set.

This is only one of the options being consulted on, The areas indicated are provisional and may not equate to areas included in regulation.

Layer ID 103881
Data type Vector polygon
Feature count 13564
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Predicted lake water quality, 2009-13

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

600
21
Added
24 Jun 2018

This dataset was first added to MfE Data Service on 24 Jun 2018.

This dataset is a result of Random Forest modelling to predict cyanobacterial biovolume in lakes nationally, which included spatial modelling of chlorophyll a, TN, TP, Secchi depth, Trophic Level Index, and Cyanobacterial biovolume.


More information about the methods used to create this dataset can be found here: www.mfe.govt.nz/publications/fresh-water/strategic...


LID - FENZ Lake ID

Name - Name of lake (where available)

RegionalCo - Regional council name

CHLA - Chlorophyll a (mg/L)

TN - Total nitrogen (mg/m3)

TP - Total phosphorus (mg/m3)

SECCHI - Secchi disc depth (m)

TLI3 - Trophic Level Index (unitless)

CyanoBioVo - Cyanobacterial biovolume (mm3/L)


Layer ID 95541
Data type Vector multipolygon
Feature count 3819
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)
Results 1 to 10 of 16