Method for deriving Stock Exclusion Low Slope Land 2020 extent.pdf

910
410
Updated
05 Aug 2020

This item was last updated on MfE Data Service on 05 Aug 2020

4
Document ID22740
File namemethod-for-deriving-stock-exclusion-low-slope-land-2020-extentpdf.pdf
TypePDF
Size696 KB

Swimming Water Quality Monitoring Points, SFRG [Latest]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1128
4
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Suitability for Recreation Grade (SFRG) swimming water quality monitoring point data.

This data is a component of the Water Quality for swimming maps: www.mfe.govt.nz/fresh-water/state-of-our-fresh-wat...

Versions

This version is the latest edition in this set.

Column headings

WKT: Point geometry

NZReach: ID of nearest River Environment Classification reach

category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/national-targets-swimm...

Council_na: Regional council name

Region: Region

sitename: Name of site

LAWA_siten: Land, Air, Water, Aotearoa's name of site

Program_ty: Type of waterbody

catchment: Name of catchment (if available)

algae: Algae status

clarity: Clarity status

Layer ID 95564
Data type Vector point
Feature count 150
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1102
8
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

Table ID 102980
Data type Table
Row count 227
Services Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Recharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1008
23
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

Three national models of groundwater recharge in New Zealand were used (NGRM, TopNet, IrriCalc) to create a mean model of groundwater recharge. This dataset summarises the gridded groundwater recharge from this model mean for the period 2000-2015 in mm/day.

_Attachment 1: _A complementary dataset describing the standard deviation of the NZGroundwaterRecharge_mean_20002015 dataset.

Attachment 2: This dataset summarises the gridded autumn groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 3: This dataset summarises the gridded spring groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 4: This dataset summarises the gridded summer groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 5: This dataset summarises the gridded winter groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Layer ID 104447
Data type Grid
Resolution 1010.000m
Services Raster Query API, Catalog Service (CS-W)

Sediment classes for REC2.4 nzsegments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

973
31
Added
03 Nov 2020

This dataset was first added to MfE Data Service on 03 Nov 2020.

This layer applies the sediment attributes’ classification, per Appendix 2C of the NPS-FM 2020, to the digital River Environment Classification (REC) v2.4 network.

This layer is meant to support stakeholders in their understanding and implementation of the suspended and deposited sediment attributes, but it does not form part of the regulation; it is not incorporated by reference.

Layer ID 105094
Data type Vector multilinestring
Feature count 593548
Primary key nzsegment
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Discharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

971
22
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model (NWT) was used to estimate the probability of groundwater discharging to the surface and separated into classes to encompass the uncertainty of the dataset.

Layer ID 104448
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Lake Water Quality for Swimming Categories, September 2017 [Latest]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

959
14
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Water quality for swimming categories for lakes with perimeters over 1.5 km. This dataset was used to compose the current state for water quality for swimming.

This information is based on modelled and measured data using the approach outlined at
www.mfe.govt.nz/fresh-water/freshwater-management-...

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset is the latest version of the Water Quality for Swimming Categories set.

Column headings:

LID: FENZ Lake ID

Name: Name of lake (where available

RC: Regional council name

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/what-government-doing/...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95554
Data type Vector multipolygon
Feature count 858
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Swimming Water Quality Monitoring Points, SOE March 2017 [Superseded]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

926
3
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

State of the Environment (SOE) swimming water quality monitoring point data.

This data is a component of the Water Quality for swimming maps: www.mfe.govt.nz/fresh-water/state-of-our-fresh-wat...

Versions

This version has now been replaced with a later edition: data.mfe.govt.nz/layer/95566-swimming-water-qualit...

Column headings

WKT: Point geometry

sitename: Name of site

NZReach: ID of nearest River Environment Classification reach

category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/national-targets-swimm...

Region: Region

name: Name of water body (if available)

catchment: Name of catchment (if available)

Dualcatch: Is catchment a two-part catchment

algae: Algae status

clarity: Clarity status

Layer ID 95565
Data type Vector point
Feature count 624
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Updated suspended sediment yield estimator and estuarine trap efficiency model results 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

886
40
Added
14 Aug 2019

This dataset was first added to MfE Data Service on 14 Aug 2019.

This dataset includes three “packages” of information, each with multiple variables. The packages include:

  1. Load – results on mean annual suspended sediment load reported by REC 2 river reach scale for various model scenario variations.
  2. Lakes – results on sediment inflow, outflow, and entrapment in lakes and reservoirs
  3. Coastal – results on sediment inflows, trap efficiency, and sedimentation rates in coastal hydrosystems (estuaries)

For further detail on the modelling methods and discussing results, see Hicks, M., Semademi-Davies, A., Haddadchi, A., Shankar, U., Plew, D. (2019) Updated sediment load estimator for New Zealand. NIWA Client Report No. 2018341CH, prepared for Ministry for the Environment. January 2019. Available online: www.mfe.govt.nz/publications/fresh-water/updated-s...

Note that some portions of this dataset refine and update 2011 modelling on suspended sediment loads across New Zealand, whereas other components, especially the coastal package, report new modelling results.

Layer ID 103686
Data type Vector linestring
Feature count 593466
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

890
14
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)
Results 21 to 30 of 55