River Water Quality for Swimming Categories, September 2017 [Latest]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

767
16
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Summary

Water quality for swimming categories for rivers 4th order and above. This dataset was used to compose the current state for water quality for swimming.

This information is based on modelled and measured data using the approach outlined at www.mfe.govt.nz/fresh-water/freshwater-management-... .

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset is the latest version of the Water Quality for Swimming Categories set.

Column headings:

NZREACH: NZREACH from the River Environment Classification Version 1

ORDER: Strahler stream order

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/national-targets-swimm...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95555
Data type Vector linestring
Feature count 66837
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: TakeFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

33
36
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

TakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data describing active consents.

Table ID 102977
Data type Table
Row count 16713
Services Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Discharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

313
8
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model (NWT) was used to estimate the probability of groundwater discharging to the surface and separated into classes to encompass the uncertainty of the dataset.

Layer ID 104448
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

National water allocation statistics 2018: HydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

558
6
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

Table ID 102980
Data type Table
Row count 227
Services Web Feature Service (WFS), Catalog Service (CS-W)

Hydrological modelling to support proposed sediment attribute impact testing 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

576
18
Updated
03 Jun 2020

This dataset was last updated on MfE Data Service on 03 Jun 2020.

This dataset reports modelled mean annual suspended sediment load reduction required to meet suspended sediment attribute bottom lines in the NPS-FM 2020. Results are reported for the REC 2 river reach scale as well as at the “catchment pourpoint average” scale. The dataset includes masks for the DoC estate as well as glacial mountain source of flow.

During policy development, the Ministry for the Environment tested suspended sediment load reductions required to meet various potential attribute bottom lines. The information from February 2020 reflects the bottom lines in the NPS-FM 2020. For further information on this specific dataset, see “Hicks and Shankar 2020. Contract 23184 Task: Sediment load reductions to meet visual clarity bottom lines”. This report is available on the Ministry for the Environment’s publications website where it is listed as Technical Report 6.

For further information on the modelling, see Hicks et al. (2019) Sediment load reductions to meet suspended and deposited sediment thresholds. NIWA Client Report No. 2019100CH. Prepared for the Ministry for the Environment. This report is available here: www.mfe.govt.nz/publications/fresh-water/sediment-....

Note that the river segment and pour point catchment results provided in the 2019 dataset form the basis for the erosion and economic modelling assessment of proposed sediment attributes as reported in Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Layer ID 103687
Data type Vector multipolygon
Feature count 633
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Option 3 for reducing nitrogen loss

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

138
11
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 3 of section 8.4 Immediate action to reduce nitrogen loss.

This dataset has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document.  These proposals are currently being consulted on.

The map provides extra detail on Option 3 in section 8.4: Immediate action to reduce nitrogen loss, of the discussion document.  The map indicates the high-nitrate catchments and sub-catchments that could be included under Option 3. These catchments have the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset which can be found here.  The catchments are further restricted to regions that do not have rules already in place or proposed. Catchments where the predominant sources of nitrate are not pastoral or horticultural in origin have been excluded.

Under this option, farmers in these catchments would have to show, in the freshwater module in their farm plan, how they will rapidly reduce nutrient leaching. Progress against the plan would be monitored by independent auditors and the regional council could take enforcement action if required.

This is only one of the options being consulted on. The areas indicated are provisional and may not equate to areas included in a regulation.

Layer ID 103879
Data type Vector polygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Predicted lake water quality, 2009-13

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1053
30
Added
24 Jun 2018

This dataset was first added to MfE Data Service on 24 Jun 2018.

This dataset is a result of Random Forest modelling to predict cyanobacterial biovolume in lakes nationally, which included spatial modelling of chlorophyll a, TN, TP, Secchi depth, Trophic Level Index, and Cyanobacterial biovolume.


More information about the methods used to create this dataset can be found here: www.mfe.govt.nz/publications/fresh-water/strategic...


LID - FENZ Lake ID

Name - Name of lake (where available)

RegionalCo - Regional council name

CHLA - Chlorophyll a (mg/L)

TN - Total nitrogen (mg/m3)

TP - Total phosphorus (mg/m3)

SECCHI - Secchi disc depth (m)

TLI3 - Trophic Level Index (unitless)

CyanoBioVo - Cyanobacterial biovolume (mm3/L)


Layer ID 95541
Data type Vector multipolygon
Feature count 3819
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

River Water Quality for Swimming Categories, December 2017 [Superseded]

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

373
5
Added
27 Jun 2018

This dataset was first added to MfE Data Service on 27 Jun 2018.

Summary

Water quality for swimming categories for rivers 4th order and above. This dataset was used to compose the current state for water quality for swimming.

Note this data is under review and will be updated in due course. This information is based on modelled and measured data using the approach outlined at www.mfe.govt.nz/fresh-water/freshwater-management-... .

The modelling methods used are outlined in Snelder et al. (2016) Strategic assessment of New Zealand’s freshwaters for recreational use: a human health perspective. LWP Client Report 2016-011 www.mfe.govt.nz/publications/fresh-water/strategic...

Versions

This dataset is the geometric version of this: data.mfe.govt.nz/table/53620-river-water-quality-f...

This dataset has now been superseded due to consultation with local authorities, and this is the latest version: data.mfe.govt.nz/layer/95555-river-water-quality-f...

Column headings:

NZREACH: NZREACH from the River Environment Classification Version 1

ORDER: Strahler stream order

Category: Water quality for swimming category see www.mfe.govt.nz/fresh-water/national-targets-swimm...

Note: blank cells are reaches where a prediction was not possible because of missing predictor variables.

Layer ID 95557
Data type Vector linestring
Feature count 66734
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Flow

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

32
7
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model was used to estimate near-surface groundwater flow amplitudes and separated into four classes to encompass the uncertainty of the dataset.

Layer ID 104449
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

National water allocation statistics 2018: RemovedHydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

514
8
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

RemovedHydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

RemovedHydroFrame contains non-consumptive hydropower information.

Table ID 102981
Data type Table
Row count 69
Services Web Feature Service (WFS), Catalog Service (CS-W)
Results 11 to 20 of 47