Number of days when wind speed exceeded storm force (Beaufort Scale 10) in 2015

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2917
5
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The ocean storm index estimates the number of days in a year when wind speeds exceed gale and storm force on the Beaufort Scale. In a gale, sea conditions are rough and waves can be over six metres high. In a storm, waves can be over 10 metres high. To put this into context, on land a near gale would make walking difficult, and a storm would cause some damage to roofs, chimneys, and trees. Climate change could lead to changes in the frequency and intensity of storms. More frequent and intense storms will likely be a stressor for habitats and species.
The ocean storm index estimates the number of days that wind speeds exceed gale and storm force on the Beaufort Scale. The Beaufort Scale is a widely used international classification that rates sea conditions from 0 (calm) to 12 (hurricane). We report on estimated wind speeds broken down to:
- gales – measure 8 on the scale, have rough sea conditions with wind speeds of approximately 62–74 km per hour and wave heights of 5.5 metres
- storms – measure 10 on the scale, have wind speeds of approximately 89–102 km per hour and wave heights of 9–11.5 metres (McDonald & Parsons, 2016).
This dataset relates to the number of days when wind speed exceeded storm force (Beaufort Scale 10) in 2015.

Layer ID 53464
Data type Grid
Resolution About 47632.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Air pollutant emissions

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2862
41
Added
16 Oct 2018

This dataset was first added to MfE Data Service on 16 Oct 2018.

An emissions inventory provides information on the amount of key air pollutants that are released into the atmosphere for a given location over a given time period. This enables us to identify sources of pollutants. By understanding the amounts that different sources contribute, air quality can be better managed and modelled.
We evaluated emissions for five key pollutants for 2015, the most-recent year that data were readily available: particulate matter (PM) less than 10 micrometres in diameter (PM10), PM less than 2.5 micrometres in diameter (PM2.5), carbon monoxide (CO), nitrogen oxides (NOx), and sulphur dioxide (SO2), because they are the most important pollutants in New Zealand.
The grouped sources include: energy-related activities, construction dust, road dust, industrial process emissions (non-combustion), agriculture (emissions from animal housing), vegetation fires (burning agricultural residue and biomass burning), and incinerating of hazardous waste.
Only human-generated emissions were included in this emission inventory. No updated data for residential wood burning were available and was assumed to be the same as the 2013 national inventory.

Table ID 98424
Data type Table
Row count 26
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Change in farm size, 2002–16

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2842
39
Added
16 Apr 2018

This dataset was first added to MfE Data Service on 16 Apr 2018.

The area of farms involved in agricultural activities, and how this is changing, is important because agricultural activities can affect soil health and water.

Agricultural activities include beef and sheep, dairy, arable, horticulture, deer, pigs, and other livestock.

Table ID 95342
Data type Table
Row count 584
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Monthly mean primary productivity (1997–2016)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2908
12
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The average concentration of chlorophyll-a (chl-a) in phytoplankton over the period 1997 to February 2016.
Concentrations of chl-a in phytoplankton are used to assess primary productivity in our oceans. Phytoplankton are primary producers of biomass (mass of living organisms) and form the main basis of marine food chains. They use the chl-a pigment to capture the sun’s energy through the process of photosynthesis. Phytoplankton growth is affected by the availability of nutrients and light, which in turn are affected by the structure of the surface water column. The surface water column structure is affected by oceanographic and climate processes; large-scale changes to climate and oceanographic conditions can lead to changes in phytoplankton growth and chl-a concentrations.

Layer ID 53472
Data type Grid
Resolution 5000.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Number of dredge tows (1990–2014)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2854
6
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Seabed trawling and dredging, when fishing nets or dredges are towed near and along the seabed, can physically damage seabed (benthic) habitats and species. It can also stir up sediment from the seabed, shading (in shallow waters) or smothering marine species. This measure focuses on coastal areas (waters shallower than 250m). Focusing on coastal benthic habitats is important as these face multiple threats (for example from land-based activities) in addition to fishing.

Table ID 53485
Data type Table
Row count 50
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Area of coastal seabed trawled by depth class (2008–12)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2844
8
Added
25 Oct 2016

This dataset was first added to MfE Data Service on 25 Oct 2016.

Seabed trawling and dredging, when fishing nets or dredges are towed near and along the seabed, can physically damage seabed (benthic) habitats and species. It can also stir up sediment from the seabed, shading (in shallow waters) or smothering marine species. This measure focuses on coastal areas (waters shallower than 250m). Focusing on coastal benthic habitats is important as these face multiple threats (for example from land-based activities) in addition to fishing.

Table ID 53510
Data type Table
Row count 3
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Area of seabed trawled by depth class (1990–2011)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2837
10
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Seabed trawling and dredging (where fishing gear is towed near or along the ocean floor) can physically damage seabed (benthic) habitats and species. These fishing methods can also stir up sediment from the seabed, creating sediment plumes that can smother sensitive species. Recovery times for affected habitats and species depend on their sensitivity and the area affected by trawling or dredging. Bottom trawling is carried out on or near the seabed in both shallow and deep waters. Dredging is carried out on the seabed in shallow waters and targets marine creatures such as scallops. This measure focuses on deepwater areas (waters deeper than 200m).

Table ID 53486
Data type Table
Row count 4
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Average number of days wind speed exceeded storm force (Beaufort Scale 10)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2912
8
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The ocean storm index estimates the number of days in a year when wind speeds exceed gale and storm force on the Beaufort Scale. In a gale, sea conditions are rough and waves can be over six metres high. In a storm, waves can be over 10 metres high. To put this into context, on land a near gale would make walking difficult, and a storm would cause some damage to roofs, chimneys, and trees. Climate change could lead to changes in the frequency and intensity of storms. More frequent and intense storms will likely be a stressor for habitats and species.
The ocean storm index estimates the number of days that wind speeds exceed gale and storm force on the Beaufort Scale. The Beaufort Scale is a widely used international classification that rates sea conditions from 0 (calm) to 12 (hurricane). We report on estimated wind speeds broken down to:
- gales – measure 8 on the scale, have rough sea conditions with wind speeds of approximately 62–74 km per hour and wave heights of 5.5 metres
- storms – measure 10 on the scale, have wind speeds of approximately 89–102 km per hour and wave heights of 9–11.5 metres (McDonald & Parsons, 2016).
This dataset relates to the average number of days wind speed exceeded storm force (Beaufort Scale 10) from 1979–2015.

Layer ID 53463
Data type Grid
Resolution About 47632.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Urban water quality - state - 2013–2015

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2793
21
Added
24 Apr 2017

This dataset was first added to MfE Data Service on 24 Apr 2017.

Urban water quality indicators include heavy metals, nutrients, and E.coli. The concentrations of these indicators are compared to the proportion of urban land cover in catchments.

Heavy metals have the ability to accumulate in sediments, shellfish, and other aquatic organisms. Metals can reach toxic levels in organisms making them unsafe to consume and can be toxic to aquatic life. Nutrients can cause excessive algal growth and E.coli has the ability to make people sick while they are swimming if concentrations are high enough. Rivers with poor water quality are rarely suitable for recreation and provide poor habitats for aquatic species.

File contains data analysis of medians and percentiles by site for water quality indicators, and includes the proportion of urban land cover in catchments in Auckland, Wellington and Christchurch over the period 2013–2015.

Table ID 53597
Data type Table
Row count 379
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Primary productivity anomalies, 2015

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2794
4
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The average concentration of chlorophyll-a (chl-a) in phytoplankton for 2015.
Concentrations of chl-a in phytoplankton are used to assess primary productivity in our oceans. Phytoplankton are primary producers of biomass (mass of living organisms) and form the main basis of marine food chains. They use the chl-a pigment to capture the sun’s energy through the process of photosynthesis. Phytoplankton growth is affected by the availability of nutrients and light, which in turn are affected by the structure of the surface water column. The surface water column structure is affected by oceanographic and climate processes; large-scale changes to climate and oceanographic conditions can lead to changes in phytoplankton growth and chl-a concentrations.

Layer ID 53460
Data type Grid
Resolution 5000.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed
Results 71 to 80 of 106