Monthly mean primary productivity (1997–2016)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2980
12
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The average concentration of chlorophyll-a (chl-a) in phytoplankton over the period 1997 to February 2016.
Concentrations of chl-a in phytoplankton are used to assess primary productivity in our oceans. Phytoplankton are primary producers of biomass (mass of living organisms) and form the main basis of marine food chains. They use the chl-a pigment to capture the sun’s energy through the process of photosynthesis. Phytoplankton growth is affected by the availability of nutrients and light, which in turn are affected by the structure of the surface water column. The surface water column structure is affected by oceanographic and climate processes; large-scale changes to climate and oceanographic conditions can lead to changes in phytoplankton growth and chl-a concentrations.

Layer ID 53472
Data type Grid
Resolution 5000.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Natural sources of particulate matter, 2000–16

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2428
12
Added
16 Oct 2018

This dataset was first added to MfE Data Service on 16 Oct 2018.

Particulate matter (PM) is made up of solid and liquid particles in the air. It is grouped according to its size – PM10 is less than 10 micrometres (µm) in diameter; PM2.5 is less than 2.5 µm in diameter. Health effects from exposure to PM include lung and cardiac disease, and premature death.
Natural sources of PM include sea salt, dust (airborne soil, also called crustal material), secondary sulphate, pollen, black carbon from wild fires, and volcanic ash. There is little evidence that sea salt particles themselves are harmful (World Health Organization (WHO), 2013) although whether sea salt that has interacted with urban air pollutants is harmful is not known. PM can also be produced by human activities, such as dust from construction or unsealed roads, but this is not considered natural because it comes from human activity.
Natural sources of PM are important because although they cannot be managed they still contribute to ambient concentrations, which are subject to the National Environmental Standards for Air Quality (NESAQ). Exceedances of the NESAQ occur when the 24-hour average PM10 concentration exceeds 50 micrograms per cubic metre (µg/m3). There is no NESAQ for PM2.5 exposure, so we report on exceedances of the WHO 24-hour average PM2.5 concentration guideline (25 µg/m3).
We report on data from nine sites from 2005–16 and report only on sea salt for natural PM because other sources of natural PM, such as dust and sulphate, can be generated by humans as well. We were not able to separate the natural from human-generated contributions. Analysis of particle size, composition, and sources in New Zealand shows that sea salt made the largest contribution to natural PM.
More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

Table ID 98425
Data type Table
Row count 13484
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

New Zealand’s marine economy (2007–2013)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3350
23
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

The marine economy shows the contribution marine-based economic activities make to the New Zealand economy as measured by gross domestic product (GDP). Measuring the marine economy shows how New Zealand’s marine environment is used to generate economic activity and how this changes over time. However, these activities can also be a source of pressure on New Zealand’s marine environment.

Table ID 53489
Data type Table
Row count 273
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Nitrogen dioxide concentrations: council and unitary authority data, 2004–17

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

665
11
Added
16 Oct 2018

This dataset was first added to MfE Data Service on 16 Oct 2018.

Nitrogen dioxide (NO2) is a gas that is harmful to human health, ecosystems, and plants (US EPA, 2008). It can be emitted directly into the air but is often formed as a secondary pollutant when nitric oxide (NO) emissions react with other chemicals. It also contributes to the formation of secondary particulate matter (PM) and ozone, which have their own health impacts. In New Zealand, motor vehicles are the main human-made source of nitrogen oxides (NOx), the collective term for NO2 and NO. Because nitrogen dioxide concentrations are closely associated with vehicle emissions, it can be used as a proxy for other motor-vehicle pollutants such as benzene, carbon dioxide, and carbon monoxide.
Human exposure to high nitrogen dioxide concentrations causes inflammation of the airways and respiratory problems, particularly asthma. Nitrogen dioxide causes leaf injury in plants exposed to high levels. It also contributes to forming secondary particulate matter and ozone, which have their own health impacts.
We report on observed nitrogen dioxide concentrations from 13 regional council and unitary authority monitoring sites. Council and unitary authority data are measured using regulatory-compliant monitors that can be directly compared with health guidelines.
More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

Table ID 98420
Data type Table
Row count 1291189
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Nitrogen dioxide concentrations: New Zealand Transport Agency data, 2010–16

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2524
21
Added
16 Oct 2018

This dataset was first added to MfE Data Service on 16 Oct 2018.

Nitrogen dioxide (NO2) is a gas that is harmful to human health, ecosystems, and plants (US EPA, 2008). It can be emitted directly into the air but is often formed as a secondary pollutant when nitric oxide (NO) emissions react with other chemicals. It also contributes to the formation of secondary particulate matter (PM) and ozone, which have their own health impacts. In New Zealand, motor vehicles are the main human-made source of nitrogen oxides (NOx), the collective term for NO2 and NO. Because nitrogen dioxide concentrations are closely associated with vehicle emissions, it can be used as a proxy for other motor-vehicle pollutants such as benzene, carbon dioxide, and carbon monoxide.
Human exposure to high nitrogen dioxide concentrations causes inflammation of the airways and respiratory problems, particularly asthma. Nitrogen dioxide causes leaf injury in plants exposed to high levels. It also contributes to forming secondary particulate matter and ozone, which have their own health impacts.
We report on observed nitrogen dioxide concentrations from the New Zealand Transport Agency’s (NZTA) monitoring network. NZTA has comprehensive coverage across New Zealand.
More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

Table ID 98426
Data type Table
Row count 828
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of days when wind speed exceeded gale force (Beaufort Scale 8) in 2015

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3062
8
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The ocean storm index estimates the number of days in a year when wind speeds exceed gale and storm force on the Beaufort Scale. In a gale, sea conditions are rough and waves can be over six metres high. In a storm, waves can be over 10 metres high. To put this into context, on land a near gale would make walking difficult, and a storm would cause some damage to roofs, chimneys, and trees. Climate change could lead to changes in the frequency and intensity of storms. More frequent and intense storms will likely be a stressor for habitats and species.
The ocean storm index estimates the number of days that wind speeds exceed gale and storm force on the Beaufort Scale. The Beaufort Scale is a widely used international classification that rates sea conditions from 0 (calm) to 12 (hurricane). We report on estimated wind speeds broken down to:
- gales – measure 8 on the scale, have rough sea conditions with wind speeds of approximately 62–74 km per hour and wave heights of 5.5 metres
- storms – measure 10 on the scale, have wind speeds of approximately 89–102 km per hour and wave heights of 9–11.5 metres (McDonald & Parsons, 2016).
This dataset relates to the number of days when wind speed exceeded gale force (Beaufort Scale 8) in 2015.

Layer ID 53462
Data type Grid
Resolution About 47632.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Number of days when wind speed exceeded storm force (Beaufort Scale 10) in 2015

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2965
5
Added
14 Oct 2016

This dataset was first added to MfE Data Service on 14 Oct 2016.

The ocean storm index estimates the number of days in a year when wind speeds exceed gale and storm force on the Beaufort Scale. In a gale, sea conditions are rough and waves can be over six metres high. In a storm, waves can be over 10 metres high. To put this into context, on land a near gale would make walking difficult, and a storm would cause some damage to roofs, chimneys, and trees. Climate change could lead to changes in the frequency and intensity of storms. More frequent and intense storms will likely be a stressor for habitats and species.
The ocean storm index estimates the number of days that wind speeds exceed gale and storm force on the Beaufort Scale. The Beaufort Scale is a widely used international classification that rates sea conditions from 0 (calm) to 12 (hurricane). We report on estimated wind speeds broken down to:
- gales – measure 8 on the scale, have rough sea conditions with wind speeds of approximately 62–74 km per hour and wave heights of 5.5 metres
- storms – measure 10 on the scale, have wind speeds of approximately 89–102 km per hour and wave heights of 9–11.5 metres (McDonald & Parsons, 2016).
This dataset relates to the number of days when wind speed exceeded storm force (Beaufort Scale 10) in 2015.

Layer ID 53464
Data type Grid
Resolution About 47632.000m
Services Raster Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Number of dredge tows (1990–2014)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2927
6
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Seabed trawling and dredging, when fishing nets or dredges are towed near and along the seabed, can physically damage seabed (benthic) habitats and species. It can also stir up sediment from the seabed, shading (in shallow waters) or smothering marine species. This measure focuses on coastal areas (waters shallower than 250m). Focusing on coastal benthic habitats is important as these face multiple threats (for example from land-based activities) in addition to fishing.

Table ID 53485
Data type Table
Row count 50
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 4m in coastal regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5306
8
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of a wave-height threshold for each year from 2008 to 2015 in coastal regions.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the four metre threshold in coastal regions.

Layer ID 53500
Data type Vector multipolygon
Feature count 144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 4m in oceanic regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5296
3
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of wave-height thresholds for each year from 2008 to 2015 in oceanic regions around New Zealand.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the four metre threshold in oceanic regions.

Layer ID 53503
Data type Vector multipolygon
Feature count 48
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 61 to 70 of 106