NZ Hill Country Winter Forage 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1477
11
Added
23 Aug 2019

This dataset was first added to MfE Data Service on 23 Aug 2019.

The dataset maps areas of winter forage cropping and intensive winter grazing occurring in hill country areas during 2018. Hill country is defined as areas where paddocks have an average slope of greater than 7 degrees. Paddocks are classified into crop type and a measure is provided of the proportion of bare ground within the paddock after grazing.

Layer ID 103810
Data type Vector multipolygon
Feature count 9044
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification New Zealand (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

16238
775
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide can be found at data.mfe.govt.nz/document/123-river-environment-cl...

Layer ID 51845
Data type Vector linestring
Feature count 576688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Gisborne (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4702
51
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 51824
Data type Vector linestring
Feature count 14146
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Manawatu (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4745
103
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51826
Data type Vector linestring
Feature count 49346
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Tasman (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4228
25
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51811
Data type Vector polygon
Feature count 16237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Canterbury (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4496
60
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51813
Data type Vector polygon
Feature count 116896
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Tasman (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4244
33
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51806
Data type Vector linestring
Feature count 14329
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Otago (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4871
100
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51855
Data type Vector linestring
Feature count 74144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Hawkes Bay (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4231
54
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51844
Data type Vector linestring
Feature count 34857
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Taranaki (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4030
29
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51851
Data type Vector polygon
Feature count 18293
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 36