Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 02 Aug 2022.
INDEX ONLY: These footprints are the index for the 'Sentinel2 2022 Chatham Islands' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz.
This imagery is a 10m, ten-band multispectral 1 (“B2” 490nm), 2 (“B3” 560nm), 3 (“B4” 665nm), 4 (“B5” 705nm), 5 (“B6” 740nm), 6 (“B7” 783nm), 7 (“B8” 842nm), 8 (“B8a” 865nm), 9 (“B11” 1610nm), 10 (“B12” 2190nm), cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over Chatham Islands made from scenes captured late-2021/early-2022.
Layer ID | 109846 |
---|---|
Data type | Vector multipolygon | Feature count | 15 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 02 Aug 2022.
INDEX ONLY: These footprints are the index for the 'Sentinel2 2022 Mainland NZ' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz.
This imagery is 10m, ten-band multispectral 1 (“B2” 490nm), 2 (“B3” 560nm), 3 (“B4” 665nm), 4 (“B5” 705nm), 5 (“B6” 740nm), 6 (“B7” 783nm), 7 (“B8” 842nm), 8 (“B8a” 865nm), 9 (“B11” 1610nm), 10 (“B12” 2190nm), cloud-minimised mosaics of Sentinel 2A and 2B satellite tiles over mainland New Zealand made from scenes captured late-2021/early-2022.
Layer ID | 109847 |
---|---|
Data type | Vector multipolygon | Feature count | 176 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was last updated on MfE Data Service on 11 May 2022.
Areas of LUCAS LUM forests that have been cleared between 2008 and 2020 inclusive. Forest clearing is detected using mosaics of satellite imagery captured over a range of dates; therefore the year of clearing provided is nominal.
Layer ID | 99909 |
---|---|
Data type | Vector multipolygon | Feature count | 47241 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 07 Nov 2021.
INDEX ONLY: These footprints are the index for the 'Sentinel2 2021 Mainland NZ' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz.
The imagery represented is a 10m, ten-band multispectral, cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over mainland New Zealand made from scenes captured late-2020/early-2021.
Layer ID | 106409 |
---|---|
Data type | Vector multipolygon | Feature count | 84 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 4.0 International
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 07 Nov 2021.
INDEX ONLY: These footprints are the index for the 'Sentinel2 2021 Chatham Islands' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz.
The imagery represented is a 10m, ten-band multispectral, cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over Chatham Islands made from scenes captured late-2020/early-2021.
Layer ID | 106408 |
---|---|
Data type | Vector multipolygon | Feature count | 9 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 04 Oct 2010.
The REC groups rivers and parts of river networks that share similar ecological characteristics, including physical and biological. Rivers that share the same class can be treated as similar to one another and different to rivers in other classes. The REC classification system groups rivers according to several environmental factors that strongly influence or cause the rivers’ physical and ecological characteristics (climate, topography, geology and land cover). A catchment is a polygon that defines the upstream watershed of a river system or sub-system. Land cover within the catchment was used to populate the river classification factors (see table 1.1 of the User Guide data.mfe.govt.nz/document/123-rec-user-guide-2010/ ).
Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...
Layer ID | 52364 |
---|---|
Data type | Vector multipolygon | Feature count | 3164 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 23 Dec 2013.
The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.
This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.
Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.
The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .
Layer ID | 51809 |
---|---|
Data type | Vector polygon | Feature count | 10856 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 23 Dec 2013.
The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.
This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.
Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.
The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .
Layer ID | 51834 |
---|---|
Data type | Vector polygon | Feature count | 87259 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 23 Dec 2013.
The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.
This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.
Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.
The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .
Layer ID | 51813 |
---|---|
Data type | Vector polygon | Feature count | 116896 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |
Creative Commons Attribution 3.0 New Zealand
You may use this work for commercial purposes.
You must attribute the creator in your own works.
This dataset was first added to MfE Data Service on 23 Dec 2013.
The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.
This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.
Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.
The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .
Layer ID | 51831 |
---|---|
Data type | Vector polygon | Feature count | 38430 |
Services | Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed |