LUCAS NZ Land Use Map 1990 2008 2012 2016 v008

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

50750
2353
Updated
19 Jun 2020

This dataset was last updated on MfE Data Service on 19 Jun 2020.

The Land Use Map is composed of New Zealand-wide land use classifications (12) nominally at 1 January 1990, 1 January 2008, 31 December 2012 and 31 December 2016 (known as "1990", "2008", "2012" and "2016"). These date boundaries were dictated by the First and Second Commitment Periods of the Kyoto Protocol. The layer can therefore be used to create either a 1990, 2008, 2012 or 2016 land use map depending on what field is symbolised.

Layer ID 52375
Data type Vector multipolygon
Feature count 651835
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification New Zealand (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

23869
1049
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide can be found at data.mfe.govt.nz/document/123-river-environment-cl...

Layer ID 51845
Data type Vector linestring
Feature count 576688
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Catchment Order 4 (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11681
791
Added
04 Oct 2010

This dataset was first added to MfE Data Service on 04 Oct 2010.

The REC groups rivers and parts of river networks that share similar ecological characteristics, including physical and biological. Rivers that share the same class can be treated as similar to one another and different to rivers in other classes. The REC classification system groups rivers according to several environmental factors that strongly influence or cause the rivers’ physical and ecological characteristics (climate, topography, geology and land cover). A catchment is a polygon that defines the upstream watershed of a river system or sub-system. Land cover within the catchment was used to populate the river classification factors (see table 1.1 of the User Guide data.mfe.govt.nz/document/123-rec-user-guide-2010/ ).

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 52364
Data type Vector multipolygon
Feature count 3164
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Catchment Order 6 (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

17670
764
Added
04 Oct 2010

This dataset was first added to MfE Data Service on 04 Oct 2010.

The REC groups rivers and parts of river networks that share similar ecological characteristics, including physical and biological. Rivers that share the same class can be treated as similar to one another and different to rivers in other classes. The REC classification system groups rivers according to several environmental factors that strongly influence or cause the rivers’ physical and ecological characteristics (climate, topography, geology and land cover). A catchment is a polygon that defines the upstream watershed of a river system or sub-system. Land cover within the catchment was used to populate the river classification factors (see table 1.1 of the User Guide www.mfe.govt.nz/environmental-reporting/about/tool...).

Additional metadata, and the River Environment Classification can be found at www.mfe.govt.nz/sites/default/files/environmental-...

Layer ID 52362
Data type Vector multipolygon
Feature count 155
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Catchment Order 5 (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9056
722
Added
04 Oct 2010

This dataset was first added to MfE Data Service on 04 Oct 2010.

The REC groups rivers and parts of river networks that share similar ecological characteristics, including physical and biological. Rivers that share the same class can be treated as similar to one another and different to rivers in other classes. The REC classification system groups rivers according to several environmental factors that strongly influence or cause the rivers’ physical and ecological characteristics (climate, topography, geology and land cover). A catchment is a polygon that defines the upstream watershed of a river system or sub-system. Land cover within the catchment was used to populate the river classification factors (see table 1.1 of the User Guide data.mfe.govt.nz/document/123-rec-user-guide-2010/ ).

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 52363
Data type Vector multipolygon
Feature count 706
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LUCAS NZ Forest LiDAR Footprints

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11062
76
Added
11 Sep 2017

This dataset was first added to MfE Data Service on 11 Sep 2017.

Note: Metadata relates to LiDAR point clouds. This layer has been provided to enable users to explore coverage and capture dates of the LiDAR. To enquire about ordering the LiDAR and/or related orthophotography, please e-mail lucas[at]mfe.govt.nz.

Ministry for the Environment, Land Use Carbon Analysis System collection of swaths of LiDAR over planted forests of interest (raw and classified returns) from 2006 to 2015.

Layer ID 88106
Data type Vector multipolygon
Feature count 8914
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Waikato (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7006
183
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51856
Data type Vector linestring
Feature count 50723
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Airsheds Gazetted

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8010
48
Updated
06 Oct 2020

This dataset was last updated on MfE Data Service on 06 Oct 2020.

A spatial dataset delineating the extent of regional airsheds notified in the New Zealand Gazette (gazette.govt.nz).

Layer ID 98617
Data type Vector multipolygon
Feature count 73
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LUCAS NZ Forest Clearing 2008-2018 v018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1730
50
Updated
22 Jun 2020

This dataset was last updated on MfE Data Service on 22 Jun 2020.

Areas of LUCAS LUM forests that have been cleared between 2008 and 2018 inclusive. Forest clearing is detected using mosaics of satellite imagery captured over a range of dates; therefore the year of clearing provided is nominal.

Layer ID 99909
Data type Vector multipolygon
Feature count 37187
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Catchment Order 3 (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9036
682
Added
04 Oct 2010

This dataset was first added to MfE Data Service on 04 Oct 2010.

The REC groups rivers and parts of river networks that share similar ecological characteristics, including physical and biological. Rivers that share the same class can be treated as similar to one another and different to rivers in other classes. The REC classification system groups rivers according to several environmental factors that strongly influence or cause the rivers’ physical and ecological characteristics (climate, topography, geology and land cover). A catchment is a polygon that defines the upstream watershed of a river system or sub-system. Land cover within the catchment was used to populate the river classification factors (see table 1.1 of the User Guide data.mfe.govt.nz/document/123-rec-user-guide-2010/ ).

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 52370
Data type Vector multipolygon
Feature count 14098
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 167