World Data - Page 6

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Note: Metadata relates to LiDAR point clouds. This layer has been provided to enable users to explore coverage and capture dates of the LiDAR. To enquire about ordering the LiDAR and/or related orthophotography, please e-mail lucas[at]mfe.govt.nz.

Ministry for the Environment, Land Use Carbon Analysis System collection of swaths of LiDAR over planted forests of interest (raw and classified returns) from 2006 to 2015.

Coastal hydrosystems describe coastal features that span a gradient from near coast freshwater lakes/wetlands (lacustrine/palustrine environments) to marine. The term 'coastal hydrosystem' avoids the common error of referring to all such features as estuaries, mislabelling the numerous types that are non-estuarine and have different behavioural characteristics and management sensitivities from any truly estuarine environment. It also encompasses the coastal systems that do not represent end-of-river environments (e.g., some pocket beaches and embayments) or are so large and complex as to be fed by several freshwater drainage features (rivers, streams, wetlands) but which are dominated by none (e.g., some harbours, fjords, sounds and coastal-lacustrine systems). It also incorporates the multiple aspects of each system, including beaches, spits, barriers, river mouths, wetlands, saltmarshes and other geomorphic, ecological and hydrological features.

The New Zealand Coastal Hydrosystem classification (NZCH) is a classification of coastal hydrosystems within New Zealand including some offshore islands. The coastal hydrosystems classification is based on a hierarchical view of the abiotic components that comprise the environments of coastal hydrosystems. This classification presents detail at the geomorphic class level because this level is particularly important for coastal management and conservation needs at national and regional scales.

The primary GIS is the point layer. Supporting files (attached) include: a CSV database of environmental variables; GIS polygon layer; and Google Earth (.kmz) point and polygon exports.

The database, GIS and Google Earth files should be used in conjunction with the Classification of New Zealand's Coastal Hydrosystems report (Hume et al. 2016) (also attached) which documents a full description of the database, the calculation procedures and limitations to the variables.

The spreadsheet comprises a database of 500 New Zealand coastal hydrosystems and their associated environmental variables developed for the report.

The GIS point file comprises 500 New Zealand coastal hydrosystems and their associated environmental variables developed for the database. The environmental variables are mapped at 1:50,000 scale.

NOTE: Within the point attribute file -9999 represents the environmental variables with no data as shown in the spreadsheet as a blank cell. Make sure to exclude these values from analyses.

The polygon files comprise 420 New Zealand coastal hydrosystems depicting their general shape of the water body basin at high tide and upstream limit.

The .kmz files are derived from the NZCH GIS point and polygon layers for use with Google Earth.

The report provides a classification of coastal hydrosystems within New Zealand including some offshore islands. The coastal hydrosystems classification reconciles and clarifies coastal hydrosystem terminology and produces a hierarchy and classification of coastal wetland, riverine, estuarine and marine types. This report identifies and provides a list of environmental variables that describe the characteristics and properties of about 500 discrete coastal hydrosystems that can be used to provide national and regional statistics on coastal hydrosystems. An Identification Key is provided to guide the determination of the classes.

A spatial dataset identifying a set of environmental conditions that have potential to inhibit growth of newly-established woody vegetation such that it might not reach a ‘forest’ status (defined as greater than 30% cover of trees of 5 m height) within a 30-40 year timeframe.

Inclusions: temperature, moisture availability, edaphic conditions, coastal exposure, and land instability

Exclusions: herbivory, competition, external gene pools, availability of seed sources and dispersers, and also fire

This ELF layer is designed to provide a concise evidence source to guide decision making regarding the potential for naturally regenerating species to reach the criteria for Kyoto-compliant forest. Due to the variable quality in the source data used to compile this layer it should only be considered to provide guidance and should not be used as authoritative for forest eligibility/ineligibility under any government scheme.

Note: Metadata relates to the mosaicked imagery. This layer has been provided to enable users to explore coverage and capture dates of the imagery. To enquire about ordering the imagery, please e-mail lucas[at]mfe.govt.nz.

This imagery is 10m, ten-band multispectral, cloud-minimised mosaics of Sentinel 2A satellite tiles over mainland New Zealand made from scenes captured late-2016/early-2017.

A spatial dataset delineating the extent of New Zealand Gazette airsheds (gazette.govt.nz).

Note: Metadata relates to the mosaicked imagery. This layer has been provided to enable users to explore coverage and capture dates of the imagery. To enquire about ordering the imagery, please e-mail lucas[at]mfe.govt.nz.

This imagery is a 15m, six-band multispectral, cloud-minimised mosaic of Landsat 8 satellite scenes over mainland New Zealand made from scenes captured late-2015/early-2016.

The Chatham Islands Land Use Map is composed of 12 land use classifications nominally at 1 January 1990, 1 January 2008, 31 December 2012 and 31 December 2016 (known as "1990", "2008", "2012" and "2016") and was created using broadly the same methodology as was used for mainland LUCAS NZ LUM 2016. These date boundaries were dictated by the First and Second Commitment Periods of the Kyoto Protocol. The layer can therefore be used to create either a 1990, 2008, 2012 or 2016 land use map depending on what field is symbolised.