Land Environments New Zealand (LENZ) - Level 2 Polygons (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2175
68
Added
30 Jun 2009

This dataset was first added to MfE Data Service on 30 Jun 2009.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 52357
Data type Vector polygon
Feature count 130829
Services Vector Query API, Web Feature Service (WFS)

River Environment Classification Watershed Taranaki (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5555
32
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51851
Data type Vector polygon
Feature count 18293
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Canterbury (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7252
78
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51813
Data type Vector polygon
Feature count 116896
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Tasman (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6696
28
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51811
Data type Vector polygon
Feature count 16237
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Land Environments New Zealand (LENZ) - Level 3 Polygons (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2157
56
Updated
04 Mar 2015

This dataset was last updated on MfE Data Service on 04 Mar 2015.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 52355
Data type Vector polygon
Feature count 528490
Services Vector Query API, Web Feature Service (WFS)

Land Environments New Zealand (LENZ) - Level 4 Polygons (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11742
410
Updated
04 Mar 2015

This dataset was last updated on MfE Data Service on 04 Mar 2015.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 52358
Data type Vector polygon
Feature count 815185
Services Vector Query API, Web Feature Service (WFS)

Marine Environment Classification EEZ 10 Classes (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6801
31
Added
03 Aug 2011

This dataset was first added to MfE Data Service on 03 Aug 2011.

The Marine Environment Classification (MEC), a GIS-based environmental classification of the marine environment of the New Zealand region, is an ecosystem-based spatial framework designed for marine management purposes.

Several spatially-explicit data layers describing the physical environment define the MEC. A physically-based classification was chosen because data on these physical variables were available or could be modelled, and because the pattern of the physical environment is a reasonable surrogate for biological pattern, particularly at larger spatial scales. Classes within the classification were defined using multivariate clustering methods. These produce hierarchical classifications that enable the user to delineate environmental variation at different levels of detail and associated spatial scales.

Layer ID 52367
Data type Vector multipolygon
Feature count 10
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Environment Classification EEZ 40 Classes (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9531
100
Added
03 Aug 2011

This dataset was first added to MfE Data Service on 03 Aug 2011.

The Marine Environment Classification (MEC), a GIS-based environmental classification of the marine environment of the New Zealand region, is an ecosystem-based spatial framework designed for marine management purposes.

Several spatially-explicit data layers describing the physical environment define the MEC. A physically-based classification was chosen because data on these physical variables were available or could be modelled, and because the pattern of the physical environment is a reasonable surrogate for biological pattern, particularly at larger spatial scales. Classes within the classification were defined using multivariate clustering methods. These produce hierarchical classifications that enable the user to delineate environmental variation at different levels of detail and associated spatial scales.

Layer ID 52369
Data type Vector multipolygon
Feature count 38
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Environment Classification EEZ 20 Classes (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7105
59
Added
19 Mar 2015

This dataset was first added to MfE Data Service on 19 Mar 2015.

The Marine Environment Classification (MEC), a GIS-based environmental classification of the marine environment of the New Zealand region, is an ecosystem-based spatial framework designed for marine management purposes.

Several spatially-explicit data layers describing the physical environment define the MEC. A physically-based classification was chosen because data on these physical variables were available or could be modelled, and because the pattern of the physical environment is a reasonable surrogate for biological pattern, particularly at larger spatial scales. Classes within the classification were defined using multivariate clustering methods. These produce hierarchical classifications that enable the user to delineate environmental variation at different levels of detail and associated spatial scales.

Layer ID 52368
Data type Vector multipolygon
Feature count 19
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Environment Classification EEZ 5 Classes (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6839
28
Added
03 Aug 2011

This dataset was first added to MfE Data Service on 03 Aug 2011.

The Marine Environment Classification (MEC), a GIS-based environmental classification of the marine environment of the New Zealand region, is an ecosystem-based spatial framework designed for marine management purposes.

Several spatially-explicit data layers describing the physical environment define the MEC. A physically-based classification was chosen because data on these physical variables were available or could be modelled, and because the pattern of the physical environment is a reasonable surrogate for biological pattern, particularly at larger spatial scales. Classes within the classification were defined using multivariate clustering methods. These produce hierarchical classifications that enable the user to delineate environmental variation at different levels of detail and associated spatial scales.

Layer ID 52366
Data type Vector multipolygon
Feature count 5
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 170