River Environment Classification Gisborne (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6484
51
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas...

Layer ID 51824
Data type Vector linestring
Feature count 14146
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Environmental Limiting Factors (2012)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6942
76
Added
24 Jul 2012

This dataset was first added to MfE Data Service on 24 Jul 2012.

A spatial dataset identifying a set of environmental conditions that have potential to inhibit growth of newly-established woody vegetation such that it might not reach a ‘forest’ status (defined as greater than 30% cover of trees of 5 m height) within a 30-40 year timeframe.

Inclusions: temperature, moisture availability, edaphic conditions, coastal exposure, and land instability

Exclusions: herbivory, competition, external gene pools, availability of seed sources and dispersers, and also fire

This ELF layer is designed to provide a concise evidence source to guide decision making regarding the potential for naturally regenerating species to reach the criteria for Kyoto-compliant forest. Due to the variable quality in the source data used to compile this layer it should only be considered to provide guidance and should not be used as authoritative for forest eligibility/ineligibility under any government scheme.

Layer ID 52374
Data type Vector multipolygon
Feature count 18763
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Tasman (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5667
34
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51806
Data type Vector linestring
Feature count 14329
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Taranaki (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6176
60
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51828
Data type Vector linestring
Feature count 16783
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Marine Environment Classification EEZ 20 Classes (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7060
58
Added
19 Mar 2015

This dataset was first added to MfE Data Service on 19 Mar 2015.

The Marine Environment Classification (MEC), a GIS-based environmental classification of the marine environment of the New Zealand region, is an ecosystem-based spatial framework designed for marine management purposes.

Several spatially-explicit data layers describing the physical environment define the MEC. A physically-based classification was chosen because data on these physical variables were available or could be modelled, and because the pattern of the physical environment is a reasonable surrogate for biological pattern, particularly at larger spatial scales. Classes within the classification were defined using multivariate clustering methods. These produce hierarchical classifications that enable the user to delineate environmental variation at different levels of detail and associated spatial scales.

Layer ID 52368
Data type Vector multipolygon
Feature count 19
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Southland (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4632
37
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51860
Data type Vector polygon
Feature count 81265
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Sentinel2 2017 Footprints

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6834
17
Added
06 Aug 2017

This dataset was first added to MfE Data Service on 06 Aug 2017.

Note: Metadata relates to the mosaicked imagery. This layer has been provided to enable users to explore coverage and capture dates of the imagery. To enquire about ordering the imagery, please e-mail lucas[at]mfe.govt.nz.

This imagery is 10m, ten-band multispectral, cloud-minimised mosaics of Sentinel 2A satellite tiles over mainland New Zealand made from scenes captured late-2016/early-2017.

Layer ID 53654
Data type Vector multipolygon
Feature count 19
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Northland (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4613
54
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51810
Data type Vector polygon
Feature count 30637
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Manawatu (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6081
105
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51826
Data type Vector linestring
Feature count 49346
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Bay of Plenty (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6171
66
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51825
Data type Vector linestring
Feature count 28391
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 31 to 40 of 168