River Environment Classification Watershed Waikato (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

5401
100
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51812
Data type Vector polygon
Feature count 56501
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Hill Country Winter Forage 2018

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

2049
15
Added
23 Aug 2019

This dataset was first added to MfE Data Service on 23 Aug 2019.

The dataset maps areas of winter forage cropping and intensive winter grazing occurring in hill country areas during 2018. Hill country is defined as areas where paddocks have an average slope of greater than 7 degrees. Paddocks are classified into crop type and a measure is provided of the proportion of bare ground within the paddock after grazing.

Layer ID 103810
Data type Vector multipolygon
Feature count 9044
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Waikato (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7006
183
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51856
Data type Vector linestring
Feature count 50723
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

NZ Airsheds Gazetted

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6812
40
Added
01 Nov 2018

This dataset was first added to MfE Data Service on 01 Nov 2018.

A spatial dataset delineating the extent of New Zealand Gazette airsheds (gazette.govt.nz).

Layer ID 98617
Data type Vector multipolygon
Feature count 72
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Hawkes Bay (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6121
67
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51844
Data type Vector linestring
Feature count 34857
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Wellington (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9966
334
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51829
Data type Vector linestring
Feature count 18074
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Sentinel2 2020 Mainland NZ Footprints

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

50
1
Added
31 Jul 2020

This dataset was first added to MfE Data Service on 31 Jul 2020.

INDEX ONLY: These footprints are the index for the 'Sentinel2 2020 Mainland NZ' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz. The imagery represented is a 10m, ten-band multispectral, cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over mainland New Zealand made from scenes captured late-2019/early-2020.

Layer ID 104816
Data type Vector multipolygon
Feature count 101
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

LUCAS NZ Forest LiDAR Footprints

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

9406
67
Added
11 Sep 2017

This dataset was first added to MfE Data Service on 11 Sep 2017.

Note: Metadata relates to LiDAR point clouds. This layer has been provided to enable users to explore coverage and capture dates of the LiDAR. To enquire about ordering the LiDAR and/or related orthophotography, please e-mail lucas[at]mfe.govt.nz.

Ministry for the Environment, Land Use Carbon Analysis System collection of swaths of LiDAR over planted forests of interest (raw and classified returns) from 2006 to 2015.

Layer ID 88106
Data type Vector multipolygon
Feature count 8914
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Land Environments New Zealand (LENZ) - Level 4 Polygons (2009)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11909
394
Updated
04 Mar 2015

This dataset was last updated on MfE Data Service on 04 Mar 2015.

Land Environments of New Zealand (LENZ) is a classification of fifteen climate, landform, and soil variables chosen for their relevance to biological distributions. Classification groups were derived by automatic classification using a multivariate procedure. Four levels of classification detail have been produced from this analysis, containing 20, 100, 200, and 500 groups respectively.
More information is available from the LENZ web site:
www.landcareresearch.co.nz/databases/lenz/

Layer ID 52358
Data type Vector polygon
Feature count 815185
Services Vector Query API, Web Feature Service (WFS)

NZ Coastal Hydrosystems

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7336
92
Added
02 Feb 2017

This dataset was first added to MfE Data Service on 02 Feb 2017.

Coastal hydrosystems describe coastal features that span a gradient from near coast freshwater lakes/wetlands (lacustrine/palustrine environments) to marine. The term 'coastal hydrosystem' avoids the common error of referring to all such features as estuaries, mislabelling the numerous types that are non-estuarine and have different behavioural characteristics and management sensitivities from any truly estuarine environment. It also encompasses the coastal systems that do not represent end-of-river environments (e.g., some pocket beaches and embayments) or are so large and complex as to be fed by several freshwater drainage features (rivers, streams, wetlands) but which are dominated by none (e.g., some harbours, fjords, sounds and coastal-lacustrine systems). It also incorporates the multiple aspects of each system, including beaches, spits, barriers, river mouths, wetlands, saltmarshes and other geomorphic, ecological and hydrological features.

The New Zealand Coastal Hydrosystem classification (NZCH) is a classification of coastal hydrosystems within New Zealand including some offshore islands. The coastal hydrosystems classification is based on a hierarchical view of the abiotic components that comprise the environments of coastal hydrosystems. This classification presents detail at the geomorphic class level because this level is particularly important for coastal management and conservation needs at national and regional scales.

The primary GIS is the point layer. Supporting files (attached) include: a CSV database of environmental variables; GIS polygon layer; and Google Earth (.kmz) point and polygon exports.

The database, GIS and Google Earth files should be used in conjunction with the Classification of New Zealand's Coastal Hydrosystems report (Hume et al. 2016) (also attached) which documents a full description of the database, the calculation procedures and limitations to the variables.

The spreadsheet comprises a database of 500 New Zealand coastal hydrosystems and their associated environmental variables developed for the report.

The GIS point file comprises 500 New Zealand coastal hydrosystems and their associated environmental variables developed for the database. The environmental variables are mapped at 1:50,000 scale.

NOTE: Within the point attribute file -9999 represents the environmental variables with no data as shown in the spreadsheet as a blank cell. Make sure to exclude these values from analyses.

The polygon files comprise 420 New Zealand coastal hydrosystems depicting their general shape of the water body basin at high tide and upstream limit.

The .kmz files are derived from the NZCH GIS point and polygon layers for use with Google Earth.

The report provides a classification of coastal hydrosystems within New Zealand including some offshore islands. The coastal hydrosystems classification reconciles and clarifies coastal hydrosystem terminology and produces a hierarchy and classification of coastal wetland, riverine, estuarine and marine types. This report identifies and provides a list of environmental variables that describe the characteristics and properties of about 500 discrete coastal hydrosystems that can be used to provide national and regional statistics on coastal hydrosystems. An Identification Key is provided to guide the determination of the classes.

Layer ID 53565
Data type Vector point
Feature count 500
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 11 to 20 of 202