Mineral Coal Open newly available acreage

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3613
8
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of Newly Available Acreage (NAA) in the territorial sea and the exclusive economic zone

Layer ID 52752
Data type Vector multipolygon
Feature count 8
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification West Coast (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3545
38
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51857
Data type Vector linestring
Feature count 59643
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Gisborne (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3542
31
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51830
Data type Vector polygon
Feature count 15796
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Type 2 Marine Protected Areas (2016 report)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3534
30
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

New Zealand’s four million km2 marine environment is diverse, with a range of coastal habitats and offshore seabed environments. There are also many marine species unique to New Zealand. Marine protected areas (MPAs) conserve or manage some of these unique habitats and species, while a range of other tools also provide marine protection. We report on the area covered by these tools as an indirect measure to understand the state of the marine environment.
Type 2 MPAs have lower levels of protection than marine reserves. For example, they may allow fishing but restrict seabed trawling.

Layer ID 53499
Data type Vector multipolygon
Feature count 43
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed Hawkes Bay (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3521
41
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51831
Data type Vector polygon
Feature count 38430
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 8m in coastal regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3524
16
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of a wave-height threshold for each year from 2008 to 2015 in coastal regions.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the eight metre threshold in coastal regions.

Layer ID 53502
Data type Vector multipolygon
Feature count 144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 6m in oceanic regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3515
12
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of a wave-height threshold for each year from 2008 to 2015 in oceanic regions.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the six metre threshold in oceanic regions.

Layer ID 53504
Data type Vector multipolygon
Feature count 48
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

DoC marine mammal sanctuaries

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3477
38
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of Marine mammal sanctuaries in the territorial sea and the exclusive economic zone.

Layer ID 52759
Data type Vector multipolygon
Feature count 9
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Watershed West Coast (2010)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

3473
41
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

The User Guide is available from data.mfe.govt.nz/document/123-rec-user-guide-2010/ . Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51823
Data type Vector polygon
Feature count 75826
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Water quality parameters in coastal and estuarine environments (2013)

Licence

Creative Commons Attribution-NonCommercial-NoDerivs 3.0 New Zealand

You may not use this work for commercial purposes.

You must attribute the creator in your own works.

You must not release derivatives of this work.

3432
75
Added
28 Sep 2015

This dataset was first added to MfE Data Service on 28 Sep 2015.

Coastal and estuarine ecosystems are affected by changes in the levels of nutrients, oxygen, and light. An overload of nutrients can be toxic or lead to algal blooms. These blooms can kill marine life by depleting oxygen levels. Suspended sediment can smother habitats or reduce light levels, affecting photosynthesis. We report on five measures of water quality: turbidity (murkiness), dissolved oxygen, and the dissolved nutrients nitrate- and nitrite-nitrogen, ammoniacal nitrogen, and total phosphorus.
This dataset relates to the "Coastal and estuarine water quality" measure on the Environmental Indicators, Te taiao Aotearoa website.

Table ID 52508
Data type Table
Row count 1623
Services Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 41 to 50 of 173