Sediment classes for REC2.4 nzsegments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

0
0
Added
03 Nov 2020

This dataset was first added to MfE Data Service on 03 Nov 2020.

This layer applies the sediment attributes’ classification, per Appendix 2C of the NPS-FM 2020, to the digital River Environment Classification (REC) v2.4 network.

​

This layer is meant to support stakeholders in their understanding and implementation of the suspended and deposited sediment attributes, but it does not form part of the regulation; it is not incorporated by reference.

Layer ID 105094
Data type Vector multilinestring
Feature count 593548
Primary key nzsegment
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

NZ Airsheds Gazetted

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8056
54
Updated
06 Oct 2020

This dataset was last updated on MfE Data Service on 06 Oct 2020.

A spatial dataset delineating the extent of regional airsheds notified in the New Zealand Gazette (gazette.govt.nz).

Layer ID 98617
Data type Vector multipolygon
Feature count 73
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Stock Exclusion Low Slope Land 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

225
80
Added
04 Aug 2020

This dataset was first added to MfE Data Service on 04 Aug 2020.

The Stock Exclusion Low Slope Land 2020 layer identifies areas of "low slope land" as defined in the Resource Management (Stock Exclusion) Regulations 2020. The layer shows the land parcels, or part parcels, defined as low slope land. These areas have a mean slope is less than or equal to 10 degrees. Parcels with a parcel intent of "ROAD" are excluded. Areas of lakes, ponds, settlements and urban parkland, as defined in Land Cover Database 5, are also excluded. Areas of low-slope grassland and annual cropland within high-slope parcels are also included in the Stock Exclusion Low Slope Land extent.

Layer ID 104827
Data type Vector multipolygon
Feature count 39024
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Sentinel2 2020 Mainland NZ Footprints

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

570
4
Added
31 Jul 2020

This dataset was first added to MfE Data Service on 31 Jul 2020.

INDEX ONLY: These footprints are the index for the 'Sentinel2 2020 Mainland NZ' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz. The imagery represented is a 10m, ten-band multispectral, cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over mainland New Zealand made from scenes captured late-2019/early-2020.

Layer ID 104816
Data type Vector multipolygon
Feature count 101
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Sentinel2 2020 Chatham Islands Footprints

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

367
2
Added
31 Jul 2020

This dataset was first added to MfE Data Service on 31 Jul 2020.

INDEX ONLY: These footprints are the index for the 'Sentinel2 2020 Chatham Islands' mosaic. It has been provided to enable users to explore coverage and capture dates of the component imagery. To enquire about ordering the imagery itself, please e-mail lucas[at]mfe.govt.nz.

The imagery represented is a 10m, ten-band multispectral, cloud-minimised mosaic of Sentinel 2A and 2B satellite tiles over Chatham Islands made from scenes captured late-2019/early-2020.

Layer ID 104819
Data type Vector multipolygon
Feature count 11
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Marlborough (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4577
45
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51854
Data type Vector linestring
Feature count 19147
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Tasman (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

6784
35
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51806
Data type Vector linestring
Feature count 14329
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Southland (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

4908
81
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51827
Data type Vector linestring
Feature count 65643
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Otago (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

7735
113
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51855
Data type Vector linestring
Feature count 74144
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Canterbury (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

8617
172
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51853
Data type Vector linestring
Feature count 94350
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 1 to 10 of 649