Stock Exclusion Low Slope Land 2020 (DEPRECATED)

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

11982
271
Added
04 Aug 2020

This dataset was first added to MfE Data Service on 04 Aug 2020.

The Stock Exclusion Low Slope Land 2020 layer identified areas of "low slope land" as defined in the Resource Management (Stock Exclusion) Regulations 2020 when the regulation was first gazetted in 2020. In December 2022 the dataset was superseded by the Stock Exclusion Low Slope Land 2022 layer.

The layer shows the land parcels, or part parcels, defined as low slope land. These areas have a mean slope is less than or equal to 10 degrees. Parcels with a parcel intent of "ROAD" are excluded. Areas of lakes, ponds, settlements and urban parkland, as defined in Land Cover Database 5, are also excluded. Areas of low-slope grassland and annual cropland within high-slope parcels are also included in the Stock Exclusion Low Slope Land extent.

Layer ID 104827
Data type Vector multipolygon
Feature count 39024
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

River Environment Classification Northland (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12110
139
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51805
Data type Vector linestring
Feature count 27492
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Freshwater pests: Senegal tea

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12209
16
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"Freshwater plant and animal pests can have significant negative impacts on ecosystem health by reducing indigenous biodiversity through predation and competition, and destabilising aquatic habitats. Freshwater plant pests can cause economic losses through blocking water intakes for hydroelectricity generation, impeded drainage or irrigation. In addition, pests can affect the suitability for recreational activities.
This dataset relates to the "Freshwater pests" measure on the Environmental Indicators, Te taiao Aotearoa website. "

Layer ID 52732
Data type Vector point
Feature count 37
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

River Environment Classification Auckland (2010) (DEPRECATED)

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12051
174
Added
23 Dec 2013

This dataset was first added to MfE Data Service on 23 Dec 2013.

The New Zealand River Environment Classification (REC) organises information about the physical characteristics of New Zealand's rivers. Individual river sections are mapped according to physical factors such as climate, source of flow for the river water, topography, and geology, and catchment land cover eg, forest, pasture or urban. Sections of river that have similar ecological characteristics can then be grouped together, no matter where they are.

This information is mapped for New Zealand's entire river network - over 425,000 kilometres of river. Different types of rivers respond differently to the pressures placed on them - the REC can be used to highlight the most appropriate management tools and approaches to reduce these pressures for each river type. Information from the classification is used to develop policy, assess the environment, and report on the quality of river water.

Stream order is the numerical position of a tributary or section of a river within the entire network. Headwater streams are assigned a stream order of 1. When two tributaries of the same stream order meet, the order increments by one for the next section downstream. However, if two sections meet where one section has higher order than the other, the next section downstream has the same order as the highest upstream section.

Additional metadata can be found at www.mfe.govt.nz/publications/ser/metadata/env-clas... .

Layer ID 51804
Data type Vector linestring
Feature count 9620
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Seamount closures

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12096
72
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

The location and extent of seamount closures designated in the exclusive economic zone.

Layer ID 52761
Data type Vector multipolygon
Feature count 17
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Annual average sea surface temperature, 2012

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12151
16
Added
11 Feb 2016

This dataset was first added to MfE Data Service on 11 Feb 2016.

The ocean waters surrounding New Zealand vary in temperature from north to south. They interact with heat and moisture in the atmosphere and affect our weather. Long-term changes and short-term variability in sea-surface temperatures can affect marine processes, habitats, and species. Some species may find it hard to survive in changing environmental conditions.

This layer shows annual average sea surface temperature for 2012 as part of the data series for years 1993 to 2013.

NIWA’s sea-surface temperature archive is derived from the Advanced Very High Resolution Radiometer (AVHRR) satellite data it receives from the National Oceanic and Atmospheric Administration. The archive provides high spatial (approximately 1km) and high temporal (approximately 6-hourly in cloud-free locations) resolution estimates of sea-surface temperatures over the New Zealand region, dating from January 1993. Uddstrom and Oien (1999) and Uddstrom (2003) describe the methods used to derive and validate the data.

This dataset relates to the "Annual average sea-surface temperature" measure on the Environmental Indicators, Te taiao Aotearoa website.

Geometry: grid
Unit: degrees Celsius

Further information can be found in:
Uddstrom, MJ (2003). Lessons from high-resolution satellite SSTs. Bulletin of the American Meteorological Society, 84(7), 896–897.
Uddstrom, MJ, & Oien, NA (1999). On the use of high resolution satellite data to describe the spatial and temporal variability of sea surface temperatures in the New Zealand region. Journal of Geophysical Research (Oceans) 104, chapter 9, 20729–20751.

Layer ID 53104
Data type Image/Raster
Resolution 2000.000m
Services Raster Tiles Query API, Catalog Service (CS-W), data.govt.nz Atom Feed

Number of extreme wave events exceeding 4m in oceanic regions, 2008–15

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12151
11
Added
19 Oct 2016

This dataset was first added to MfE Data Service on 19 Oct 2016.

Extreme wave indexes estimate the occurrence of extreme wave events in coastal and oceanic waters. Extreme wave indexes estimate the number of times a significant wave height exceeds one of three threshold values for at least 12 hours in 24 marine regions. The three wave-height thresholds are four metres, six metres, and eight metres.
This indicator estimates the exceedances of wave-height thresholds for each year from 2008 to 2015 in oceanic regions around New Zealand.
Significant wave height is a measure of the ‘typical’ wave height in a place over a time period. It is four times the standard deviation of the water surface if, for example, you were to measure water moving up and down a jetty piling for an hour. The largest individual wave will typically have a height around twice the significant wave height.
We use three wave-height thresholds because of the regional variation in extreme wave events. In general, the north experiences less exposure to consistently strong winds, and the waves generated by them, than the south. Four-metre tall waves are considered extreme in the northern-most parts of New Zealand but are more common in the south. For the southern-most parts of New Zealand, eight-metre waves better represent extreme wave events.
This dataset relates to the number of extreme wave events exceeding the four metre threshold in oceanic regions.

Layer ID 53503
Data type Vector multipolygon
Feature count 48
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Freshwater pests: Gambusia

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12124
28
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"Freshwater plant and animal pests can have significant negative impacts on ecosystem health by reducing indigenous biodiversity through predation and competition, and destabilising aquatic habitats. Freshwater plant pests can cause economic losses through blocking water intakes for hydroelectricity generation, impeded drainage or irrigation. In addition, pests can affect the suitability for recreational activities.
This dataset relates to the ""Freshwater pests"" measure on the Environmental Indicators, Te taiao Aotearoa website. "

Layer ID 52706
Data type Vector point
Feature count 900
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Freshwater pests: Manchurian wild rice

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12135
12
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"Freshwater plant and animal pests can have significant negative impacts on ecosystem health by reducing indigenous biodiversity through predation and competition, and destabilising aquatic habitats. Freshwater plant pests can cause economic losses through blocking water intakes for hydroelectricity generation, impeded drainage or irrigation. In addition, pests can affect the suitability for recreational activities.
This dataset relates to the ""Freshwater pests"" measure on the Environmental Indicators, Te taiao Aotearoa website. "

Layer ID 52715
Data type Vector point
Feature count 43
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed

Freshwater pests: Water hyacinth

Licence

Creative Commons Attribution 3.0 New Zealand

You may use this work for commercial purposes.

You must attribute the creator in your own works.

12099
17
Added
11 Jan 2016

This dataset was first added to MfE Data Service on 11 Jan 2016.

"Freshwater plant and animal pests can have significant negative impacts on ecosystem health by reducing indigenous biodiversity through predation and competition, and destabilising aquatic habitats. Freshwater plant pests can cause economic losses through blocking water intakes for hydroelectricity generation, impeded drainage or irrigation. In addition, pests can affect the suitability for recreational activities.
This dataset relates to the ""Freshwater pests"" measure on the Environmental Indicators, Te taiao Aotearoa website. "

Layer ID 52741
Data type Vector point
Feature count 10
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W), data.govt.nz Atom Feed
Results 81 to 90 of 1166