Depth to hydrogeological basement map, 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

285
12
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This data set provides an update of New Zealand’s depth to hydrogeological basement map. Depth to hydrogeological basement can be loosely defined as the ‘base of aquifers’; or more strictly as ‘the depth to where primary porosity and permeability of geological material is low enough such that flued volumes and flow rates can be considered negligible’. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: depth to hydrogeological basement. Lower Hutt (NZ): GNS Science. 19 p. Consultancy Report 2019/140.

A national model was used to estimate depth to hydrogeological basement. Hydrogeological basement refers to geological material with primary porosity and permeability that is low enough such that fluid volumes and flow rates can be considered negligible.

Layer ID 104446
Data type Grid
Resolution 250.000m
Services Raster Query API, Catalog Service (CS-W)

Erosion modelling to support proposed sediment attribute impact testing 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

956
27
Added
05 Sep 2019

This dataset was first added to MfE Data Service on 05 Sep 2019.

This dataset reports erosion modelling results regarding annual mean sediment load reductions required to meet proposed suspended sediment attribute bottom lines. For more detail on the modelling process and methods, see Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Results of modelled mitigations are reported at catchment scale and at the REC2 river reach scale. The modelled on-farm mitigations (per economic optimisation as reported in Neverman et al. (2019) are also mapped.

Layer ID 103850
Data type Vector multipolygon
Feature count 585
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Discharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

344
11
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model (NWT) was used to estimate the probability of groundwater discharging to the surface and separated into classes to encompass the uncertainty of the dataset.

Layer ID 104448
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Estimated groundwater flux, 2019: Flow

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

32
7
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model was used to estimate near-surface groundwater flow amplitudes and separated into four classes to encompass the uncertainty of the dataset.

Layer ID 104449
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Estimated groundwater flux, 2019: Recharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

426
7
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

Three national models of groundwater recharge in New Zealand were used (NGRM, TopNet, IrriCalc) to create a mean model of groundwater recharge. This dataset summarises the gridded groundwater recharge from this model mean for the period 2000-2015 in mm/day.

_Attachment 1: _A complementary dataset describing the standard deviation of the NZGroundwaterRecharge_mean_20002015 dataset.

Attachment 2: This dataset summarises the gridded autumn groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 3: This dataset summarises the gridded spring groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 4: This dataset summarises the gridded summer groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 5: This dataset summarises the gridded winter groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Layer ID 104447
Data type Grid
Resolution 1010.000m
Services Raster Query API, Catalog Service (CS-W)

Hydrological modelling to support proposed sediment attribute impact testing 2020

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

623
19
Updated
03 Jun 2020

This dataset was last updated on MfE Data Service on 03 Jun 2020.

This dataset reports modelled mean annual suspended sediment load reduction required to meet suspended sediment attribute bottom lines in the NPS-FM 2020. Results are reported for the REC 2 river reach scale as well as at the “catchment pourpoint average” scale. The dataset includes masks for the DoC estate as well as glacial mountain source of flow.

During policy development, the Ministry for the Environment tested suspended sediment load reductions required to meet various potential attribute bottom lines. The information from February 2020 reflects the bottom lines in the NPS-FM 2020. For further information on this specific dataset, see “Hicks and Shankar 2020. Contract 23184 Task: Sediment load reductions to meet visual clarity bottom lines”. This report is available on the Ministry for the Environment’s publications website where it is listed as Technical Report 6.

For further information on the modelling, see Hicks et al. (2019) Sediment load reductions to meet suspended and deposited sediment thresholds. NIWA Client Report No. 2019100CH. Prepared for the Ministry for the Environment. This report is available here: www.mfe.govt.nz/publications/fresh-water/sediment-....

Note that the river segment and pour point catchment results provided in the 2019 dataset form the basis for the erosion and economic modelling assessment of proposed sediment attributes as reported in Neverman et al. (2019). Impact testing of a proposed suspended sediment attribute: identifying erosion and sediment control mitigations to meet proposed sediment attribute bottom lines and the costs and benefits of those mitigations. Maanaki Whenua Landcare Research Client Report. Prepared for the Ministry for the Environment.

Layer ID 103687
Data type Vector multipolygon
Feature count 633
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: AccumulatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

633
28
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

  • AccumulatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to non-hydroelectric consents. It contains upstream accumulated maximum consented rates by use, source and in total. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

This dataset was used for the "Consented freshwater takes" indicator, as part of the environmental reporting series: Our freshwater 2020. This indicator can be found at www.stats.govt.nz/indicators/consented-freshwater-...

  • This indicator helps us to understand where water is consented to be taken from, how much is allocated to be taken, and what it is used for. We report on the maximum volume that can be taken annually, and the maximum rate of take by primary use, primary source, and region for consents that involve consumptive water takes.
  • Our analysis and results have not included consents for hydroelectricity generation or non-consumptive water use. We also present the modelled potential impact of consented consumptive freshwater takes (excluding hydropower consents) on natural river flow across New Zealand.
  • More information on this dataset and how it relates to our environmental reporting indicators and topics can be found in the attached data quality pdf.

The “Consented freshwater takes” indicator uses two datasets

Table ID 102976
Data type Table
Row count 698236
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

532
8
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

690
6
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

Table ID 102980
Data type Table
Row count 227
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: RemovedHydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

659
9
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

RemovedHydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

RemovedHydroFrame contains non-consumptive hydropower information.

Table ID 102981
Data type Table
Row count 69
Services Web Feature Service (WFS), Catalog Service (CS-W)
Results 1 to 10 of 62