Option 1 for reducing nitrogen loss

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1242
12
Added
20 Sep 2019

This dataset was first added to MfE Data Service on 20 Sep 2019.

This dataset shows land that would be covered by the option 1 of section 8.4 Immediate action to reduce nitrogen loss.

This web map has been developed by the Ministry for the Environment to support policy proposals in the Action for Healthy Waterways discussion document. The proposals are currently being consulted on.

It provides extra detail on Option 1 in section 8.4 of the discussion document (Immediate action to reduce nitrogen loss). The map indicates the pastoral catchments and sub-catchments specified as high-nitrate in Option 1, where regional rules are not already in place or proposed, and shows the land considered to be low-slope.

Low-slope is defined in this option as land parcels with an average slope of less than 5, 7 or 10 degrees. We are seeking feedback on the appropriate slope threshold to use.

The catchments are those with the highest 10% of nitrate levels in the MfE Environmental Reporting River Water Quality dataset found here. Catchments where the predominant sources of nitrate are non-pastoral in origin are excluded.

Under Option 1, a per-hectare cap, or threshold, for nitrogen losses will be set for each sub-catchment with similar soil type and rainfall. This threshold will be based on a ranking of nitrogen losses from farms within each sub-catchment, and could be set at the 90th percentile, or the 70th, or a point between. Feedback is sought on where this threshold should be set.

This is only one of the options being consulted on, The areas indicated are provisional and may not equate to areas included in regulation.

Layer ID 103881
Data type Vector polygon
Feature count 13564
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: RemovedHydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1172
14
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

RemovedHydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

RemovedHydroFrame contains non-consumptive hydropower information.

Table ID 102981
Data type Table
Row count 69
Services Web Feature Service (WFS), Catalog Service (CS-W)

Water quality for swimming: Scenario 0

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1158
21
Added
10 Oct 2018

This dataset was first added to MfE Data Service on 10 Oct 2018.

This dataset relates to the March 2018 report National E. coli modelling - Supplementary material to support setting draft regional targets for swimmable rivers.

It represents Scenario 0, baseline (i.e. 2017) including the current level of on-farm fencing and land use - further details available in the above report.

The geometries are based off REC1, and the field 'Swimability_band' defines the modelled E. coli attribute state NPS-FM human health for recreation value. The rest of the fields come from the River Environment Classification.

Layer ID 98358
Data type Vector multilinestring
Feature count 73336
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: TakeFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1122
53
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

TakeFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data describing active consents.

Table ID 102977
Data type Table
Row count 16713
Services Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

1094
8
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

HydroFrame contains consumptive hydropower information.

Table ID 102980
Data type Table
Row count 227
Services Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Recharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

997
22
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

Three national models of groundwater recharge in New Zealand were used (NGRM, TopNet, IrriCalc) to create a mean model of groundwater recharge. This dataset summarises the gridded groundwater recharge from this model mean for the period 2000-2015 in mm/day.

_Attachment 1: _A complementary dataset describing the standard deviation of the NZGroundwaterRecharge_mean_20002015 dataset.

Attachment 2: This dataset summarises the gridded autumn groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 3: This dataset summarises the gridded spring groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 4: This dataset summarises the gridded summer groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Attachment 5: This dataset summarises the gridded winter groundwater recharge from this model mean for the period 2000-2015 in mm/day. Also complementary dataset of standard deviation.

Layer ID 104447
Data type Grid
Resolution 1010.000m
Services Raster Query API, Catalog Service (CS-W)

Sediment classes for REC2.4 nzsegments

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

958
31
Added
03 Nov 2020

This dataset was first added to MfE Data Service on 03 Nov 2020.

This layer applies the sediment attributes’ classification, per Appendix 2C of the NPS-FM 2020, to the digital River Environment Classification (REC) v2.4 network.

This layer is meant to support stakeholders in their understanding and implementation of the suspended and deposited sediment attributes, but it does not form part of the regulation; it is not incorporated by reference.

Layer ID 105094
Data type Vector multilinestring
Feature count 593548
Primary key nzsegment
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

Estimated groundwater flux, 2019: Discharge

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

960
22
Added
27 Jan 2020

This dataset was first added to MfE Data Service on 27 Jan 2020.

This set of data sets provides an estimation of groundwater flux. There are three components: Groundwater recharge: development of nationwide mean (daily and seasonal) groundwater recharge data sets through the combination of three pre-existing groundwater recharge models; Groundwater–surface water exchange: development of a national indicative groundwater discharge data set using an existing national groundwater flow model, as well as comparison with a pre-existing gaining/losing stream prediction data set; Groundwater flow: development of a national groundwater flow data set using an existing national groundwater flow model. For more detail on the process and methods, see Westerhoff et al. (2019). New Zealand groundwater atlas: Groundwater Fluxes. Lower Hutt (NZ): GNS Science. 60 p. Consultancy Report 2019/126.

A national groundwater model (NWT) was used to estimate the probability of groundwater discharging to the surface and separated into classes to encompass the uncertainty of the dataset.

Layer ID 104448
Data type Image/Raster
Resolution 250.000m
Services Catalog Service (CS-W)

Updated suspended sediment yield estimator and estuarine trap efficiency model results 2019

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

867
40
Added
14 Aug 2019

This dataset was first added to MfE Data Service on 14 Aug 2019.

This dataset includes three “packages” of information, each with multiple variables. The packages include:

  1. Load – results on mean annual suspended sediment load reported by REC 2 river reach scale for various model scenario variations.
  2. Lakes – results on sediment inflow, outflow, and entrapment in lakes and reservoirs
  3. Coastal – results on sediment inflows, trap efficiency, and sedimentation rates in coastal hydrosystems (estuaries)

For further detail on the modelling methods and discussing results, see Hicks, M., Semademi-Davies, A., Haddadchi, A., Shankar, U., Plew, D. (2019) Updated sediment load estimator for New Zealand. NIWA Client Report No. 2018341CH, prepared for Ministry for the Environment. January 2019. Available online: www.mfe.govt.nz/publications/fresh-water/updated-s...

Note that some portions of this dataset refine and update 2011 modelling on suspended sediment loads across New Zealand, whereas other components, especially the coastal package, report new modelling results.

Layer ID 103686
Data type Vector linestring
Feature count 593466
Services Vector Query API, Web Feature Service (WFS), Catalog Service (CS-W)

National water allocation statistics 2018: HydroAccumlatedFrame

Licence

Creative Commons Attribution 4.0 International

You may use this work for commercial purposes.

You must attribute the creator in your own works.

878
14
Added
03 Jun 2019

This dataset was first added to MfE Data Service on 03 Jun 2019.

HydroAccumlatedFrame dataset to accompany National water allocation statistics for environmental reporting; 2018 report.

www.mfe.govt.nz/publications/fresh-water/national-...

This report updates previously published statistics on water consented to be taken from surface and groundwater sources for consumptive uses (such as irrigation or drinking water). The report focusses on the potential pressure on surface water flows from consumptive water takes. Stream flow pressure is characterised by accumulating water consented to be taken as percentage of median flow in all river reaches affected by consented takes in New Zealand.

Data relating to: a) the influence of all non-hydroelectric consents; b) the influence all consumptive hydroelectric consents; and c) the combined influence of all consumptive consents, regardless of hydroelectric or non-hydroelectric. Please note that the upstream accumulated total for each nzsegment can appear in multiple rows; once for each FactorName.

Table ID 102979
Data type Table
Row count 182397
Services Web Feature Service (WFS), Catalog Service (CS-W)
Results 51 to 60 of 63